Take the car back to the dealer if it is less than one year old as it is still under the 100% warranty.
Lift the engine compartment hood. Remove the headlight retaining bolts. Remove the wiring harness. The headlight will come free. Reverse the process to install the new headlight.
The headlight bulbs for the Chrysler LHS are inserted in the back of the light housings. There is a twist ring that holds them in, rotate the ring to remove and replace the bulb.
I stopped by a Chrysler dealer and they informed me it was a 2 hour job. The front bumper cover has to be removed and then the headlight assembly in order to change the bulb. A cost of approximately $120.00 in labor to change a $12.00 bulb.
In order to change the headlight on a 1994 Chrysler LHS, you must lift the hood and take off the shroud and the front grill. Then you can move the battery if you're changing the light on that side. There may be a few odds and ends that you may have take off to change the bulb but you should be able to reach and change the light bulb on your car.
Get the headlight, and see if its just a bulb(from the rear installs) or it's the entire light(installs from the front) ..a library will most likely have a shop manual for free
No.
The 2013 Chrysler 200 has 16 valves.
The 2015 Chrysler 200 has 16 valves.
The 2014 Chrysler 200 has 24 valves.
The 2011 Chrysler 200 has 16 valves.
The 2012 Chrysler 200 has 16 valves.