Often
To change the shifter cable on a 1998 Oldsmobile Silhouette, first you need to disconnect the cable from the shifter, then disconnect it from the engine's control arm. Then replace it with the new cable and make sure it is functioning.
The shifter cable connects the shifter to the transmission.
The shifter cable has retaining nuts on each end of the cable. Loosen the nuts. Remove the guide retainers. The cable will come off and can be replaced.
Try replacing the transmission sensor/cable it is $35.The signal that tells the computer to turn OD back on is probably not making it to the transmission.
The starter on a 1995 Hyundai Accent is mounted directly to the transmission. To find it trace the positive battery cable. Remove the two bolts that mount it to the transmission and unplug the wiring. Replace the unit.
Take the console out then unhook the cable from the shifter. RAise the car and take it loose from underneath. Use stands when you are under the car.
The 1997 Chevy Blazer shifter cable will have swivel nuts on each end of the cable. Connect the shifter cable and turn the swivel nuts to the right to install the shifter cable.
just slap yourself in your face
You need to disconnect the cable from the transaxel. Then you pull out your dash cluster. Remove clip from speedometer cable then just pull it out. Reverse for installation.
Loosen the shifter cable not on each end of the shifter cable. The shifter cable will come off. Reverse the process to install the new shifter cable.
The 2002 Ford Windstar shifter cable goes from the back of the transmission to the bottom of the shifter stick. The cable is approximately 6 feet long.
How do you adjust an F-250 shifter cable? 2000 model