Well I have a '96 Cavalier with a 2.2 and I was actually looking at my EGR Valve today. Its actually very simple! I dont know if you know much about cars but if your looking at the motor from the front of the car, on the right hand side is the thermostat; right behind the thermostat is the EGR Valve. On the EGR valve is a plug. All you have to do is take that plug off of the top. Then on the EGR valve at the bottom is 2 bolts. Remove those bolts and pull off the existing EGR valve. If your new one didn't come with a gasket make sure not to ruin the old one. Now all you have to do is replace it the exact opposite way as taking it off. Its actually very simple. If you can remove two bolts then you can do it.
i think it means it needs an oil change or something might be leaking in the engine
The Chevrolet Cavalier 2.2 liter engine will fit into a Chevrolet S 10 pickup. You will need to change the motor mounts on the Cavalier engine in order for the engine to bolt in properly.
No
how do you change a timing chain on a 2003 Chevy cavalier echotech 2,2l
Never as the 1998 Chevrolet Cavalier does not have a belt, it has a chain that should last the life of the engine.
NO.
will 2001 2.2 cavalier interchange engine parts with a 2000 cavalier
The 98 Cavalier 2.4 is a NON interference engine.
I replaced my 1995 S10 2.2 engine with a 2.2 cavalier engine and it worked fine.
nobody really knows
there is the spark plug boots
Why are ets and engine light on in 98 Chevy cavalier