Chevy Venture
Dodge Dakota
Ford F-150

How do you change the PVC valve on a 2001 Venture?

293031

Top Answer
User Avatar
Wiki User
2007-05-29 15:44:34
2007-05-29 15:44:34

First of all it is the PCV valve and not PVC(the plastic). The PCV valve is located on the valve cover towards the front of the vehicle,nearly 4 inches from the oil dipstick. It is inserted in a rubber grommet on the valve cover and is connected to a hose about half an inch in diameter. Both the hose and the grommet are fitted to th PCV valve by merely pressing them in. First press the hose on the PCV valve then seat(press) the PCV valve into the grommet.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

* The PCV valve is located in the valve cover. * Detach the hose from the valve cover and pull out the PCV valve

User Avatar

The PVC valve on a 2001 Maxima is located in the rear valve cover just behind the throttle body.

User Avatar

To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.

User Avatar

The PCV valve is located in the valve cover.

User Avatar

do you want that PVC in schedule 40 or schedule 80,1",2"? its a PCV-(Positive Crankcase ventilation )valve.

User Avatar

The PVC valve on a 2000 Maxima is located in the rear valve cover just behind the throttle body. REMOVAL # Grasp the PVC valve and pull it out of the valve cover

User Avatar

The PCV valve for a 2001 Buick LeSabre is located in the top of one of the valve covers. It is a plug in unit and is easily changed.

User Avatar

you remove the dog house and it will be on the left valve cover

User Avatar

form_title=PVC Valve Change form_header=Don't let your car's performance suffer and keep the emissions clean with a new PVC valve. What is the year, make and model of your vehicle?=_ How many miles are on your car?=_ Describe the problem in detail.=_ When was the last time you changed your oil?=_

User Avatar

It is in the driver side valve cover, you must change the valve cover to replace the PVC valve.

User Avatar

were and how do you change a PVC valve on a Chevy avalance

User Avatar

For the 3.2 L, V-6 engine, it is located on the drivers side from valve cover

User Avatar

Hi, The PCV valve is located on the driver side of the engine, in what might be considered the "left-front" corner of the engine. There should be a link with this question that shows several views of the engine compartment on this van. You can see the valve in a few of those pictures. Good Luck

User Avatar

where is the pcv valve located on a 2001 chevy suburban It is stuck in a rubber hose and pushed into the top rear drivers side valve cover.

User Avatar

check on the valve cover it is normally inside it on the back part ont the passenger side

User Avatar

on the top back of the vaulvecover

User Avatar

ware is the PVC valve 2002 deville

User Avatar

should be in the top of the valve cover on the passenger side and i believe you mean pcv valve right?

User Avatar

Pontiac PVC Valve is located on the Driver's side rear valve cover.

User Avatar

A PVC Valve shuts off water A pcv valve is for positive crankcase ventilation in an engine

User Avatar

i would like to know where the pvc valve is and how to change it on my 1990 olds 98 regency 3.8.

User Avatar

The PVC Valve is most easily seen from under the car. It is to the Driver's side of the Oil Filter. You can see the hose coming down from the throttle body. This is a metal PVC valve that threads into a port on the block. It can be accessed from above by moving the throttle cables and such aside. F. Bryan


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.