Auto Parts and Repairs
Alternators
2000-2005 Dodge & Plymouth Neons
1995-1999 Dodge & Plymouth Neons
DIY Projects

How do you change the alternator belt on a 1996 dodge neon?

192021

Top Answer
User Avatar
Wiki User
2011-09-13 00:17:50
2011-09-13 00:17:50

First you back off the stud at the top of the alternator, than at the back of the alternator there is an adjuster tensioner bolt has to be loosened, then you need to loosen the power steering pump (3 bolts), then remove power steering belt, then remove alternator belt, then to install new belt do the same except in reverse order.... (found out the hard way.)

123
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Remove the wiring harness from the back of your 1996 Dodge Ram 1500 alternator. Remove the belt from the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.

User Avatar

If it's the alternator belt, loosen the bolts holding the alternator in place, then use something like a hammer handle to pry the alternator away from the engine which will tighten the belt. Hold the pressure on the alternator while tightening the bolts. This is a general procedure, not specific to 1996 dodge.

User Avatar

THE ALTERNATOR IS LOCATED ON THE LOWER BACK SIDE OF THE FRONT OF MOTOR(follow the drive belt to the alt.).

User Avatar

What bolts to loosen to put alernator belt on and how to put it on when a/c belt is on.

User Avatar

Since There is no tensioner pulley you have to loosen your alternator.

User Avatar

The 2000 Dodge Caravan alternator can be changed by removing the alternator belt. Remove the wiring harness from the back of the alternator. Loosen and remove the alternator retaining bolts. Install the new alternator by reversing the process.

User Avatar

Remove the alternator belt from your 1996 Ford Ranger alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.

User Avatar

There isn't a timing belt on this vehicle, it only has a serpentine belt for alternator, power steering, ect.

User Avatar

Do you have diagram of 96 olds 98 putting a belt on an alternator.

User Avatar

The alternator is driven by the drive belt. Find the belt and follow the routing and you will find the alternator.

User Avatar

how do you change 2004 kia sorento alternator belt

User Avatar

the alternator is run off of your s belt, it doesnt have its own specific belt

User Avatar

Loosen the alternator tensioner bolt. The alternator belt will become loose. Remove the alternator belt. Put the new alternator belt on and reverse the process.

User Avatar

how do I loosen fan belt to remaove alternator for replacement of alternator?

User Avatar

There is a tensioner bolt that is connected to the alternator. You have to screw in the bolt, which will pull the alternator out and tighten the belt.

User Avatar

unhook the battery, remove the cerpintine belt, remove the wires, remove the bad alternator, put on the new alternator, replace the wires starting w/ the negative one, replace the cerpintine belt, tighten the belt.

User Avatar

You need to losten the screws on the alternator to losen the belt, then you can take it off, and replace it.

User Avatar

You have to remove the power steering belt and the AC belt to remove the alternator belt.

User Avatar

The alternator belt on a 1998 Dodge Neon is adjusted by loosening the retaining bolts and applying pressure to the side of the alternator with a pry bar. With the belt tight, the alternator can then be bolted down.

User Avatar

Go here for your answer: http://www.cardomain.com/memberpage/338233/4

User Avatar

Begin by removing the alternator tensioner bolt. Slide the alternator to the left. Remove the alternator belt. Reverse the process to install the new alternator belt.

User Avatar

can you change the alternator belt in a 1998 Chevy metro from under the car.

User Avatar

To change the alternator belt an a 1985 Chevy Celebrity: 1. Loosen the adjuster bolt and the mounting bolt. 2. Move the alternator to release the belt tension and remove the belt. Reverse to reinstall a new belt.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.