find the master cylinder and the brake line take the brake line off let all the fluid drain out then take the old one all the way off and put thenew back on
I just read that there was a recall on the fuel lines and other parts sometime in 2004. Google "recalls on a 96 olds aurora" and it will list it.
The 1998 Oldsmobile fuel lines are held in place with swivel nuts on each end of the fuel line. Turn the swivel nuts to the left to remove the old rotted fuel lines. Reverse the process to install the new fuel lines.
The Aurora.
I have not changed one on an Aurora, however, I have changed other types and they all seem similar. Usually getting at them is the hard part. You will remove 2-3 bolts, 1-2 vaccum lines,sometimes a metal tube, clean off the old gasket and reverse the procedure.Before I would replace one, I would spray(soak) it with 'DEEPCREEP' made by the SEA FOAM company. Most EGR valves stick because of carbon build-up and this product will dissolve carbon. It may require a couple appications. I hope this helps you. Mark
be more specific, bleed, what kind, or crossreferences of other models..
the filter is under the car even with the rear tires coming a few inches out from the gas tank there are two lines going to the tank one has the filter on it its very simple to reach and change
How to change brake lines on a 1991 Buick Lesabre?
.You can remove the air conditioner compressor, from your Oldsmobile automobile, by removing the compressor belt. Remove the air conditioning Freon. Remove the Freon lines. Remove the retaining bolts
Get a chilton manual its in the back of the book its well worth it there 25.00.
under the air filter box and battery platform front driver side
about 4 in the trans, about 5 in the lines.
Integrated into the rear windowof the car. You have both the rear defrost lines and the antennae all in one!