To change the brake lights on a 1997 Volkswagen Polo first locate the brake light housings in the trunk. Remove the plastic covers and unlock the bulbs. Remove the bulbs and install the new brake lights.
Check the operation of the stop light switch - usually located at the upper end of the brake pedal under that dash area Check or replace bulbs
change ur brake pads?
abs light stays on
First step: start by finding the brakes on it...
To change a brake light bulb on a 2003 VW Polo the housing unit must be located. It is found inside the trunk behind a removable plastic piece. Once the plastic is off the bulb can be replaced.
how many reverse lights on a polo 2011
To replace the brake light bulbs on a VW Polo, pull away the carpeting in the trunk, unscrew the bolt holding the lights on, and disconnect the wiring. Replace the bulbs, put the wiring and bolts back, then replace the carpeting.
Check these things:1. Are the bulbs okay? 2. Are the fuses good? 3. Using an voltmeter or circuit checker see if ther is power at the bulb connector. 4. Finally check the switch at the brake pedal.
Take a photo of your front disc and pads.and ill be able to explain how.
Field Trip - 1997 Polo Phonies - 1.13 was released on: USA: 1997
VW say it should be changed every 60,000mls
How do I replace rear brakes on a VW Polo GTI