Want this question answered?
how do you change the light bulb over the license plate on 2000 eclipse
you don't
there are plastic covers over them on the inside of the trunk that you pop off
afshar13@yahoo.com
Open the turn there is a little hatch take it off twist the light out and pull the bulb put the new one in simple.
how to replace bulbs on a 2009 mitsubishi eclipse
If you want to change the light you have to remove the right rear internal panel (located in the trunk). Only after removing the panel you will gain access to the light. Then it's just matter of removing nuts replacing the light and putting everything together.
1991 Mitsubishi Eclipse front turn signal light bulb lamp replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
In a 2004 Mitsubishi Lancer replacing the rear light bulb is relatively easy. First remove the plastic cover from the dome light. Unscrew the light bulb and insert the replacement.
You must open the hatch, remove the plastic strips then you must unbolt the tail lamp assembly and remove the bulb.
h4
There is a single phillips head screw holding each light in, you remove it, the lights should come out. To get the bulb out, there should be two tabs on the back side...you twist counter clockwise (left) then pull out