support rear of engine. remove drive shaft. remove transmission. remove cluth. remove fly wheel. reinstall is exact opposite of removal
Yes.
Flywheel
yes you can all you need to do is switch the automatic flywheel and putt on a standard flywheel and make sure the clutch from the transmission will bolt up to the flywheel.
No. Flywheel required.
For most engines there is no need to change the crankshaft to use an engine for an automatic or a manual transmission. For an automatic, connect a flex-plate to the crankshaft. For a manual transmission connect a flywheel.
No, the 2003 manual transmission will not fit a 1991 Ranger.
Manual transmission lubricant type: MERCON automatic transmission fluid. Capacity: 2.8 quarts. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups
remove transmission, remove torque converter (auto), or clutch and pressure plate (manual) remove flywheel flywheel and pressure plate must be Torqued to factory specs
Motorcraft MERCON automatic transmission fluid is used in the 5 speed manual transmission according to the 1997 Ford Ranger owners manual
The manual transmission on a Ford Ranger should be changed on a regular basis. Fill the transmission with any good quality regular or synthetic transmission fluid.
Motorcraft MERCON automatic transmission fluid in the 5 speed manual transmission of a 2000 Ford Ranger in North America
The Tranny will bolt up to the engine fine you just have to change all the components from manual to automatic (clutch, flexplate, flywheel, and all that jazz) Good Luck!