You need to remove the front tires to change the front brake pads on a 1993 Aerostar. So the new pads fit, you need to squeeze the caliper back, and then tap out the slide rails. Remove the old pads and replace with new ones and reassemble.
take off the wheel look right pass all the brake stuff you will be able to get to two of em that way and get 2 in front of the van
On a 1993 Ford Aerostar 3.0 ( and 4.0 ) 3 - 6 2 - 5 1 - 4 front of Ford Aerostar
where is location of thermostat in ford aerostar van, 1993
how do you change a window motor on a 93 aerostar or can you please tell me how to get the windows down without the motor... my e-mail is firstname.lastname@example.org
my 1993 and 1994 dosent have anyway of doing it!
Front brakes are done the usual way but the back pistons have to be screwed into the calibers not pushed in.
The 1993 Aerostar does not use R-134a. It uses R-12.
Yes they are compatible
A 1993 Ford Aerostar would have come from the factory with ( 5W-30 )
On a 1993 Ford Aerostar , 3.0L V6 engine : The distributor is located on the TOP of the engine , near the REAR
Begin by removing the tire and wheel from your 1993 GMC. Remove the brake spring and the brake caliper. The brake shoes will come off. Reverse the process to install your new brake shoes.
Bring to a mechanic
For a 1993 Ford Aerostar 3.0 liter V6 engine : The spark plug firing order is ( 1 - 4 - 2 - 5 - 3 - 6 ) The distributor rotor turns CLOCKWISE ( looking from the top ) The engine cylinder locations are numbered : 3 - 6 2 - 5 1 - 4 front of Ford Aerostar
A 1993 Ford Aerostar ( 3.0L and 4.0L V6 engines ) came from the factory with ( 5W-30 )
The rear brake pads on your 1993 Ford Escort can be changed by removing the brake pad Springs and break caliper. The brake pads will come off. Reverse the process to install the new brake pads.
yes you can all you need to do is change the tail shaft cover between the two transmissions
witch one did you change the one in the dash or on top of the rearend
On a 1993 Ford Aerostar , 4.0 liter V6 engine : With engine oil filter change : I ASSUME it is the same as the 4.0 in my 1995 Ford EXPLORER ( 4.7 litres / 5.0 U.S. quarts of 5W-30 engine oil )
lost the spring for brake pad
At the "Y" of the cables under the car in front of the rearend.