I have 2000 Galant and the process is the same way with your 2001. Remove the tire. Using a power wrench remove the two srews that hold the caliper, this is what puts pressure on the front break pads. Make sure you dont remove the break fluid line or else there will be a mess. Then with long screwdriver put pressure on the caliper unit to push back the pressure ring inside of the caliper. This will help put the caliper back on over the new break pads. Next remove the pads. Make sure you save the heat shields and put them on the new pads. Installation is the reverse.
I believe the awnser varies on what model you have... I have a 1999 galant GTZ mine has disc ( rotors ) front and back, The rear has the disc drum combo for the parking brake... Hope this helps
Is it like regular brakes are is there something special tool I need ?
on 1999 Mitsubishi galant the transmission have stop working it don't go front or back what can I do to fix it.
No, the car will not start.
on the front side of the throttle body.
2001 Mitsubishi galant ES. Speaker specs Front door: 6 1/2" Rear deck: 6 x 9"
the speed sensor for 2004 Mitsubishi Galant is located on the front case of the transmission output shaft and speed sensor. It is approximately under the hood to the left of the engine.
under the front of the car on the driver side .
in front of the cat sensor 2 is after the cat
The rear deck speakers in a 2002 Mitsubishi Galant measure 6 inches by 9 inches. The front door speakers measure 6 3/4 inches.
to change the front ends you need fenders bumper lights hood and a good idea of what your doing and that you have no need to change your 7th gen front end to an 8th gen
How do you change the front brakes on a Ford Escort- ZX2 model, 2002 model
It's located in front of the back tire in the passenger side, it looks like a white short cylinder, and it is so easy to change it.
There are no emergency brakes on the front wheels of vehicles.
Recommended pressures 34 psi front, 31 psi rear.
Is behind the front board, right behind the stereo
The transmission drain plug on a 2003 Mitsubishi Galant is located on the front of the transmission, near the bottom. It allows the fluid to be easily removed during maintenance.
from staningn in front of the car. left hand side some what under the batery
To replace the front brake pads on a 2003 Mitsubishi Galant you will only need a few tools. You will need a jack, tire blocks, a large C-clamp, and a 14 mm socket.
How do I change the front breaks on my 2002 Toyota RAV4?
What size wrench do you need to change the front brakes on a 2001 dodge durango?"
you need to check your motor mounts you have 4 of them. i have a 1999 galant and i changed the top mount
same as the front there both disk brakes just like the front
It will depend on year of the vehicle. See sources and related links below.
same as the front brakes they r both disc brakes