Brake Pads and Rotors
Mercury Cougar
DIY Projects

How do you change the front rotors on a 1999 mercury cougar?

567

Top Answer
User Avatar
Wiki User
2008-05-09 01:18:05
2008-05-09 01:18:05

well u need a 15 mm socket and a t40 star wrench.take off the two star bolts on the back of the caliper then pull caliper off and then take the two 15mm bolts of the back of the braket and then pull of rotor reverse to put back on.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Yes , the 1999 Mercury Cougar is FRONT wheel drive

User Avatar

No , a 1994 Mercury Cougar is rear wheel drive

User Avatar

For the 1999 cougar they have 2 different size brake rotors it sounds like you need the 276mm size

User Avatar

On a 2001 Mercury Cougar : The radiator is located in the engine compartment , at the front of the vehicle

User Avatar

Change front brake rotors on a 1998 Hyundai Accent?

User Avatar

On a Mercury Cougar : ( 1999 to 2002 model years are front wheel drive ) Older model years are rear wheel drive

User Avatar

It's grounded on the front of the Mercury Cougar frame next to the headlight assembly.

User Avatar

no it is defently rear wheel ================================================== That would depend on which model year , there have been rear wheel drive and front wheel drive versions of the Mercury Cougar

User Avatar

1995 Mercury Cougar does not have front wheel brake shoes. It has disc brakes and therefore disc brake pads. Copy & paste this link into your browser. http://www.advanceautoparts.com/english/youcan/html/ccr/ccr20021101db.html

User Avatar

the front bearings on the 1989-thru-1997 ford thunderbird/mercury cougar cannot be changed, the whole front hub comes as one piece and have to be replaced as a single unit.

User Avatar

How do you change the front rotors on a 2004 Chevy tracker

User Avatar

They are 5"x7" front ant rear, http://www.modifiedlife.com/1991-mercury-cougar-car-audio-wiring-schematic/

User Avatar

The 2.5 liter " Duratec " V6 engine used in a 1999 Mercury Cougar uses ( 2 ) timing CHAINS , both located at the front of the engine ( 1 chain to each cylinder head )

User Avatar

Remove the wheel, the calipers and the rotors, reverse procedure with new rotors.

User Avatar

You can find a front door latch assembly diagram, for your 1996, Mercury Cougar from the manufacturer website. Many auto-parts websites will have the diagram.

User Avatar

The starter is located on the front side of the transmission in this model of the Mercury Cougar. If you need to work on it make sure the transmission is cold so as you do not burn yourself.

User Avatar

firewall 1-----2-----3 ( bank 1 ) 4-----5-----6 ( bank 2 ) front of 1999 Mercury Cougar ( V6 )

User Avatar

YOU MIGHT NEED TO CHANGE OR BUY NEW ROTORS I HAVE A 2004 AND MY ROTORS WERE BAD COULD NOT RESURFACE HAD TO BUY NEW ONES

User Avatar

Tap on the rotors with a hammer, after removing the tire and wheel and the brake assembly. The rotors will come loose. Slide the rotors off and reverse the process.

User Avatar

The front rotors need to be pressed on, if you know someone with an industrial press you can do it yourself.

User Avatar

remove the brake caliper and the rotors come right off


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.