Well, most of all fuel pump relays, and what looks like it's twin both sit on a bracket bolted to the fenderwell passenger side, just above the or behind the notorious fusible links, above the ESC sensor, one is for your AC, and the second is your fuel pump relay, there's also a "hot" jumper there to test your fuel pump. Use that red wire, connect a 12v source to see if your pump is running, that will eliminate that as the problem, as for the relay itself, take that to a auto-zone, they should test it for you.
ignition switch is located on top of steering column you will need to drop column down to access it
Attach the wiring harness to the and of your 1986 Chevrolet Caprice ignition switch. Slide the ignition switch into the ignition slot. Tighten the ignition switch with the retaining ring.
The 1986 Chevrolet Caprice starter relay switch is located in the fuse box. The relay switch is the first large switch on the right hand side of the fuse box.
Find the screws to pull of the cover. Should be 2 - 4 screws. Save
Chevrolet does not use inertia switches.
Could be,Blown fuse,Bad blower motor,Bad blower motor switch,Bad blower motor speed resistor,
In a 89 Chevy caprice, your fuse box is located on the driver side under the emergency brake and trunk release switch.
The oil pressure switch does NOT have a reset.
how do i get the key tu turn in a 1995 caprice classic, if it stuck? It could be the ignition control switch located on top of the steering column which will need to be replaced or the key cylinder itself.
Possibly defective or misadjusted brake light switch.
rpo #9c1 police package with dash switch near radio
You can change your 1995 Chevrolet ignition switch by removing the ring at the top of the ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
The rheostat on the headlight switch is bad.
Maybe a bad switch or motor Try reversing the wires on switch
The low oil cut off switch should be on the side of the oil pan. It is built into the oil pressure switch.
check g/box inhibitor switch could be out of adjustment
Check the brake light switch on the brake pedal. Might have to replace it.
Should be just up above on the brake pedal.
The step-by-step instructions on how to change a 1997 Chevrolet Cavalier LS 2.2l electrical-switch relay oil pressure switch is not stated, it is best to download a free Chevrolet Cavalier manual for further information.
The Chevrolet Colorado brake light switch is quite simple to change. The brake light switch simply plugs in and out.
it could be a bad vacuum line or it could be the the throttle position switch
it could be your window switch..try changing it
If you follow the instructions that come with the replacement it's not that hard.
The speedometer should already have klicks on it. Just look for the blue numbers under the white. If you want to change the whole thing I suggest you find a junkyard in Canada that will ship you one. They are pretty easy to switch out.