Take the intake off, then take the heads off of it, but be very careful when you put the heads back on. You have to torque them down in a specific order and if you over-tighten then you can crack a head. Also if you don't torque the head bolts down right, the head gasket won't seal properly.
Your Answer
Related Questions
Transmission Modulator 1996 Ford Mustang?
Transmission Modulator 1996 ford mustang can not find location
1996 Ford Mustang license plate light?
( bulb # 168 ) for a 1996 Ford Mustang license plate light
Will a 2000 Ford Mustang rear end fit a 1996 Ford Mustang?
Yes, it will.
What components do you change on a 1997 Ford Thunderbird 3.8L to put in a 1996 Ford Mustang 3.8L?
Is your starter and alternater OK?
What is the horsepower of a 1996 mustang gt?
The 1996 Ford Mustang GT was rated at 215 horsepower
How do you remove 1996 Ford Mustang radiator fan from its radiator motor?
How to remover 1996 ford mustang radiator fan from the radiator motor
How much horsepower in 1996 mustang gt?
The 1996 Ford Mustang GT was rated at 215 horsepower
How many quarts of oil does a 1996 Ford Mustang take?
The 1996 Ford Mustang owners manual shows : WITH FILTER CHANGE 3.8 L - V6 engine - ( 5 quarts ) 4.6 L - V8 engine - ( 6 quarts )
What is the Oil capacity of a 1996 Ford Mustang 4.6?
The 1996 Ford Mustang owners manual shows : for the 4.6 L ( 2V ) with filter change 6 quarts / 5.7 liters oil dipstick is used to determine oil capacity
Can a 1996 or 1997 Ford Mustang V6 transmission fit on a 1998 Ford Mustang V6?
Yes it certainly can.
Will a 1996 Ford Mustang tail light fit a 1998 Ford Mustang?
Yes, these tail lights are interchangeable.
Will rims from a 1993 Ford Probe fit a 1996 Ford Mustang?
Not directly, no.
How hard is it to change blown head gaskets on a 1996 Ford Windstar 3.8L V6 engine?
It is a big job. If you attempt it, get a manual from AUTOBOOKSONLINE.COM
How much horsepower does a 1996 Ford Mustang 5.0?
There is no 5.0 engine in a 1996 mustang. 96 is the first year of the 4.6 engine.
Does a 1996 mustang have a timing belt or timing chain?
The 3.8 liter V6 engine in a 1996 Ford Mustang has a timing CHAIN
Does a 1996 Ford Mustang have a different key for the doors?
Not from the factory
How much does a 1996 Ford Mustang weight?
2 pounds
1996 V6 mustang cubic inch displacement?
The 3.8 L - V6 engine - in a 1996 Ford Mustang is 232 cubic inches
How much horsepower does a 1996 mustang v6 have?
The 3.8 liter V6 engine in a 1996 Ford Mustang is rated at : ( 150 horsepower from the factory )
What size is the gas tank in a 1996 Ford Mustang gt?
According to the 1996 Ford Mustang Owner Guide : All models have a ( 15.4 U.S. gallon / 58.3 liter gas tank )
How many quarts of oil in a 1996 mustang?
According to the 1996 Ford Mustang Owner Guide : With engine oil filter change : The 3.8 liter V6 engine takes : ( 5.0 U.S. quarts , 5W-30 is the PREFERRED oil )
How do you remove the trunk lock from a 1996 Ford Mustang?
Drill out the rivet.
How many miles per gallon does a 1996 ford mustange get?
The 1996 Ford Mustang Coupe gets 18 miles per gallon in the city, and 27 miles per gallon on the highway. The 1996 Ford Mustang Coupe is available with a 5-speed manual transmission.
Will a driver door for a 1997 Ford Mustang fit a 1996 mustang?
Yes, the 1996 and 1997 are the same body style so this should work fine.
Where is the fuse box in a 1996 Ford Mustang GT?
Above the left knee
