answersLogoWhite

0

  • Ford Ranger
  • Ford Expedition XLT
  • Ford Ranger XLT

How do you change the headlamp bulb on a 1999 ford ranger?

User Avatar

Wiki User

βˆ™ 2007-08-09 21:47:50

Best Answer
Copy

It's very simple to replace the head lamp bulbs. Simply loose the outer ring wich keeps the bulb in site, remove the cable harness, pull the bad bulb out, get a new bulb and insert it back into the light assembly, tighten the outer ring, replace the cable harness and you're done...It will take no longer than 10 minutes per side,

2007-08-09 21:47:50
This answer is:
πŸ€“
🀯
πŸ€”
User Avatar

Your Answer

Loading...

Related Questions

How do you change bulb on a rover 25?

how to change headlamp bulb on rover 25


How do you change headlamp bulb on Ford Kuga?

change bulb on ford kuga


How do you change the headlight bulb on a 1988 Toyota Celica?

You cant just change the bulb, you have to change the whole headlamp.


How do you change the headlamp bulb on a 1991 Chevrolet caprice?

To remove the headlamp bulb on a 1991 Chevrolet Caprice simply twist the retainer counterclockwise, remove the bulb from the headlamp capsule and unplug the bulb from the wiring connector. To install the new bulb plug it into the wiring connector, insert the bulb into the headlamp capsule and twist the retainer clockwise and you're finished.


How do you change a headlight bulb on a 2009 Malibu?

you need to remove the front fascia to remove the headlamp to change the bulb


Change peugeot 406 coupe headlamp bulb?

As the climate change bulbs


How do you change the headlamp bulb on 2001 Mitsubishi eclipse?

you don't


How do you change headlamp bulb on 2001 mustang?

look in your manual


What headlamp bulb do you need for a 1999 ford fiesta finesse 1.3?

h7


Change headlight bulb ranger?

what is the bulb Walt for my 2004 ford ranger xlt 4.0


How do you change a main beam light bulb in a Fiat Punto 2001?

Change the whole headlamp bulb. Should be a H4.


How to Changing headlight bulb 2005 ford f 250?

Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period of time may effect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamp with the bulb removed from the headlamp. # NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position. Disconnect the headlamp connector. # Remove the headlamp bulb. ## Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove. ## Remove the headlamp bulb.Installation CAUTION: Bulbs 9004 and 9007 look similar, but are not interchangeable. # Install the headlamp bulb. ## Install the headlamp bulb. ## Rotate the headlamp bulb retainer clockwise one-eighth turn.# Connect the headlamp connector.


Change headlamp bulb ford puma?

HI, see "You Tube" where there is a short video showing how to change a Puma headlight bulb


How can you change the headlights on expedition 1999?

***CAUTION***The halogen bulb contains gas under pressure. The bulb may shatter if the gas envelope is scratched or if the bulb is dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. è The headlamp bulb should not be removed from the headlamp until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed from the headlamp. Headlights Removal & Installation 1. Raise and support the hood. 2. Raise the headlamp retainers by pushing rearward and pulling up. 3. If equipped, rotate the headlamp bulb protective counterclockwise and remove. 4. Disconnect the headlamp bulb electrical connector. 5. Remove the headlamp assembly. 6. Rotate headlamp bulb retainer counterclockwise and remove. 7. Remove the headlamp bulb by pulling it straight out with a gentle up-and-down rocking motion. ***WARNING*** Do not touch the glass bulb with your fingers. Oil from your fingers can severely shorten the life of the bulb. If necessary, wipe off any dirt or oil from the bulb with rubbing alcohol before completing installation. To Install; 8. Install a new bulb into the headlamp assembly. 9. Install the headlamp bulb retainer and turn it clockwise to engage the retaining tabs. 10. Attach the bulb electrical connector. 11. If equipped, install the headlamp bulb protective cover. 12. Install the headlamp assembly. è Be sure the headlamp assembly is positioned correctly with the alignment pins inserted into the proper holes and onto the ribs of the reinforcement. 13. Engage the retainers by gently pushing down. 14. Turn the lights on and check the bulb operation.


How do you change headlamp bulb 2008 gmc Yukon?

you don't. take it to dealer and they will change it for free.


How do you remove headlight assembly on a 2000 Ford F-250?

Removal WARNING: The halogen bulb contains gas under pressure. The bulb may shatter if the glass envelope is scratched or if the bulb is dropped. Handle the bulb only by its base. Avoid touching the glass envelope. NOTE: The headlamp bulb should not be removed from the headlamp until just before a new bulb is installed. Removing the bulb for an extended period of time may effect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamp with the bulb removed from the headlamp. # NOTE: Make sure that the headlamp switch and the ignition switch are in the OFF position. Disconnect the headlamp connector. # Remove the headlamp bulb. ## Rotate the headlamp bulb retainer counterclockwise one-eighth turn and remove. ## Remove the headlamp bulb.Installation CAUTION: Bulbs 9004 and 9007 look similar, but are not interchangeable. # Install the headlamp bulb. ## Install the headlamp bulb. ## Rotate the headlamp bulb retainer clockwise one-eighth turn.# Connect the headlamp connector.


How do you change headlamp bulb 2002 ford focus?

take it to a trained mechanic?


How do you change the headlamp bulb in a 2003 Grand Prix?

Caution Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury: Turn off the lamp switch and allow the bulb to cool before changing the bulb. Leave the lamp switch OFF until the bulb change is complete. Always wear eye protection when changing a halogen bulb. Handle the bulb only by its base. Avoid touching the glass. Keep dirt and moisture off the bulb. Properly dispose of the used bulb. Keep halogen bulbs out of the reach of children. Raise the hood. Remove the headlamp assembly bolts from the upper fascia support. Slide the headlamp assembly outward enough to release the headlamp bracket tabs from the slots in the upper fascia support. Position the headlamp assembly away from the vehicle body to access the electrical connector. Disconnect the electrical connector from the headlamp assembly. Remove the headlamp assembly from the vehicle. Disconnect the electrical connector from the headlamp bulb/socket. Remove the headlamp bulb/socket retainer ring from the headlamp, by turning counterclockwise. Remove the headlamp bulb/socket from the headlamp assembly.


How do you change the headlamps on a 1999 Ford Expedition XLT?

***CAUTION***The halogen bulb contains gas under pressure. The bulb may shatter if the gas envelope is scratched or if the bulb is dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. è The headlamp bulb should not be removed from the headlamp until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed from the headlamp. Headlights Removal & Installation 1. Raise and support the hood. 2. Raise the headlamp retainers by pushing rearward and pulling up. 3. If equipped, rotate the headlamp bulb protective counterclockwise and remove. 4. Disconnect the headlamp bulb electrical connector. 5. Remove the headlamp assembly. 6. Rotate headlamp bulb retainer counterclockwise and remove. 7. Remove the headlamp bulb by pulling it straight out with a gentle up-and-down rocking motion. ***WARNING*** Do not touch the glass bulb with your fingers. Oil from your fingers can severely shorten the life of the bulb. If necessary, wipe off any dirt or oil from the bulb with rubbing alcohol before completing installation. To Install; 8. Install a new bulb into the headlamp assembly. 9. Install the headlamp bulb retainer and turn it clockwise to engage the retaining tabs. 10. Attach the bulb electrical connector. 11. If equipped, install the headlamp bulb protective cover. 12. Install the headlamp assembly. è Be sure the headlamp assembly is positioned correctly with the alignment pins inserted into the proper holes and onto the ribs of the reinforcement. 13. Engage the retainers by gently pushing down. 14. Turn the lights on and check the bulb operation.


How do you change a headlamp on 2003 expedition?

***CAUTION***The halogen bulb contains gas under pressure. The bulb may shatter if the gas envelope is scratched or if the bulb is dropped. Handle the bulb carefully. Grasp the bulb only by its base. Avoid touching the glass envelope. è The headlamp bulb should not be removed from the headlamp until just before a replacement bulb is installed. Removing the bulb for an extended period of time may affect headlamp bulb performance. Contaminants may enter the headlamp where they can settle on the lens and reflector. Never turn on the headlamps with the bulb removed from the headlamp. Headlights Removal & Installation 1. Raise and support the hood. 2. Raise the headlamp retainers by pushing rearward and pulling up. 3. If equipped, rotate the headlamp bulb protective counterclockwise and remove. 4. Disconnect the headlamp bulb electrical connector. 5. Remove the headlamp assembly. 6. Rotate headlamp bulb retainer counterclockwise and remove. 7. Remove the headlamp bulb by pulling it straight out with a gentle up-and-down rocking motion. ***WARNING*** Do not touch the glass bulb with your fingers. Oil from your fingers can severely shorten the life of the bulb. If necessary, wipe off any dirt or oil from the bulb with rubbing alcohol before completing installation. To Install; 8. Install a new bulb into the headlamp assembly. 9. Install the headlamp bulb retainer and turn it clockwise to engage the retaining tabs. 10. Attach the bulb electrical connector. 11. If equipped, install the headlamp bulb protective cover. 12. Install the headlamp assembly. è Be sure the headlamp assembly is positioned correctly with the alignment pins inserted into the proper holes and onto the ribs of the reinforcement. 13. Engage the retainers by gently pushing down. 14. Turn the lights on and check the bulb operation.


How do you change nearside front headlamp bulb on mondeo 2003?

2 sliding bars hold headlight in remove and pull headlamp forward and out


How do you replace the headlight bulb on a 2001 Pontiac Grand Prix?

See posting for "How do you change the headlamp bulb in a 2003 Grand Prix?" All these model years are similar in production for the headlamp assembly.


Headlight bulb change on 2005 VW Toureg?

getting the headlamp assembly to slide out to access the insert for the bulb is tricky


What size bulb do you need for a 1999 ford ranger headlight?

# 9007


How do you change a headlight bulb on a 2003 s-10 Chevy?

Standing in front of the bad headlamp, with the hood open, notice the two black tabs sticking up behind the headlamp assembly. These are locks that hold the headlamp assembly in place. Remove the locks by wiggling and pulling straight up. Now the headlamp assembly will drop out the front far enough to twist out the bulb socket to change the bulb. Reverse for installation.