Heater Cores and Blower Fans
Toyota Tacoma

How do you change the heater core on a 1989 Toyota pickup?

789

Top Answer
User Avatar
Wiki User
Answered
2008-11-11 20:51:33
2008-11-11 20:51:33

IF YOU HAVE A/C, YOU WILL HAVE TO REMOVE EVERYTHING BUT THE STEERING COLUMN (IT'S THE FIRST PART MOUNTED UP UNDER THE DASH)

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


well, considering that there is no 1989 Toyota tacoma, i wouldn't think so..if you're talking about a 1989 Toyota pickup, then no

The 1989 Toyota pickup had a curb weight that ranged from 2,565 pounds to 3,765 pounds. The '89 Toyota pickup was selected as Motor Trend's 'Truck of the Year.'

The fuse for the wipers on a 1989 Toyota pickup are located under the dash, near the hood release. It is in the main fuse panel which controls most of the vehicle's electronics.

How do you change the heater core on a 1989 Oldsmobile Cutlass Ciera? or where can I get the Info on replaceing it

I have been told from my Auto trans expert that he can change mine in 89 ute about 45 mins Hope that helps Bill

It is located on the bottom of the windshield washer reservoir.

Gear oil, Best place to get it is at WALMART.

You add automatic transmission fluid to a 1989 V6 3.0 Toyota pickup truck through the filler tube in the engine compartment. This is also used to check the fluid level.

above the oil filter to the back alittle

the 89 toys had the 22r 22re and 3.0 v6

The ECM (computer) is located on the passenger side kick panel!

Depends. If both are trucks and both are 4cyl or both are V6 and as long as the 95 is a pickup not a Tacoma then yes.

The headlight relay on a 1989 Toyota pickup is located on the right side of the engine compartment. There is a fuse box on the right-hand side fender wall. The headlight relay is in this fuse box.

The clock in my 1989 toyota van soes not work. What can be the problem?

89 Buick park ave install a heater coil

The water from your 1989 Chevrolet Cavalier cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. Reverse the process to install the new heater core.

I think it's under the bed, passenger's side in a bracket on the frame. It's very easy to get to. You don't need to put the car on a lift but you do need to get on your back near the rear tire. That's where it is on my 1989 Toyota Pickup 2.4 2 barrell carbureted engine.

I checked two reference manuals. The correct gap is .032" or 32 thousandths.

you have to take off the hubs and you need crazy hard to find tools

The spark plug gap on a 1989 Toyota pickup with a 3.0 liter V6 engine should be set at .032 inches. The best spark plug for this vehicle would be an iridium plug.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.