How do you replace the blower motor on a 1994 chevy lumina euro?
Remove the wiring harness from the back of your 1994 Chevy heater fan motor. Remove the heater fan motor retaining bolts. Remove the fan from the front of the heater motor. Reverse the process to install the new heater fan motor.
how do i change my blower motor on my 2007 malibu
the beretta and lumina motors are about the same i have a lumina motor in my 95 beretta
the blower motor for a 92 lumina is under the dash on the passenger side...my husband had to change the motor in out car a few months back.... right under the glove box
Are you asking about the heater blower motor or the engine cooling blower motor?
you dont rotate it you have to pull the altnator off to change them
If they are both 3100 engines...yes. Direct swap. The only thing you MAY have to change would be the motor mounts.
take the plastic of from the passenger side underneath the dash.. the blower motor is up under their tucked away.. but you can get it after a few hrs of work..
Behind the dang motor
what is the spark plug gap for a 98 Chevy lumina sedan 3.1Liter engine
Right next to the blower motor
There are four motor mounts located on a 1990 Chevy Lumina. Two on either side of the engine. One the rear and one in front of the engine.
Ask someone who knows about a 1991 Lumina 3.1 Euro or 'google' it!
yes, same motor
Access below glove box Remove wiring harness Remove 3-4 small 5/32? bolts Remove heater motor
if you dont have any oil in the cars motor that would be a reasin why its knocking
The heater blower motor is under the hood bolted to the heater plenum on the passenger side of the car.
you have to take the motor brackets that hook the motor to the front of the car and then roll the engine forward carefully to get to the back three plugs.
if its a 1987-1994 unhook the coolant tank unplug heater motor and 5 or 6 bolt off heater motor and you are done to put on reverse process
I need instructions on how to change the window motor in 1995 Chevy Camaro.
its connected to the windshield washer jug
i had this problem the intake manifol gasket is blowed