There are three screws that you need to remove to gain access to the bulbs. 2 are on the side of the cover, and 1 is at the bottom. They are kind of hard to see. The 2 on the size are between the "vent looking things" and the 1 below is hiding just below the cover and the bumper. Once you find the screws, it is very easy. Everything is exterior, nothing interior to remove. .
99 rodeo 3.2
my ac dont work
how do you remove transmission in 1999 rodeo
sending unit in tank
Where can I print a engine/timing diagram for a 1999 2.2 Isuzu rodeo?
Yes, but you don't want the 2001 engine, it has more issues than the 1999 engine.
The shift lock solenoids are located on the valve body on a 1999 Isuzu Rodeo. There are two shift solenoids.
How do you add freon to a 1999 Honda Passport
There is a third screw between the brake light and the bumper.
A faulty bulb?
Yow have to remove the entire intake manifold to access it. I highly recommend taking it in and having it done by a pro.
At Walmart! :-)
A 1999 Isuzu Rodeo that starts and then dies is not getting enough fuel, or the fuel mixture is off. It could be a clogged fuel line, dirty fuel filter or the fuel pump. It will need to be serviced.
could be a gasket that has finally gaveway and the smell of oil is the oil burning on the engine.
The 1999 Isuzu Rodeo uses 5w-30 motor oil. The oil should be changed every three months or 3000 miles of use.
Under the intake manifold, its very difficult!
I lift mine 3 inchescheck this linkwww.independent4x.com
Some causes for a 1999 Isuzu Rodeo to stop running include a lack of fuel, a bad battery, or defective spark plugs. There can also be a combination of issues which would need to be diagnosed by a mechanic.