I have an 88 Jeep Comanche and have replaced the cluster bulbs and also replaced the whole cluster to a new cluster with a tach. You have to remove the dash trims (3 screws), then it will expose the screw for the cluster. Remove those and carefully pull out the cluster. It may not have enough slack due to the speedo cable and you may have The Cluster with a tach beside the Speedo plugs in just like the older one with no problem. Just make sure that the speedo cable clip that attaches to the new cluster with a tach fits the same or you may have to replace the speedo cable to match.
How do you change the light bulbs in the instrument panel in 1998 Toyota corolla
we can change it through decreasing its value.
To change the dash light bulbs you must remove the instrument panel.
Age. If it is the bulb in the instrument cluster change all the bulbs at the same time.
You have to remove the instrument cluster to get access to the bulbs.
remove the trim panel around the instrument cluster then remove cluster. On the back of instrument cluster are the bulbs just turn them half a turn and they come right out.
The instrument light dimmer is on the main lighting switch - rotate to dim or brighten. Have you checked that your instrument light bulbs are all OK?
It is practically impossible to reach up behind the dash to change the bulbs. Remove the trim around the instrument panal and you should be able to pull it out enough to change the bulbs. You may have to disconnect the speedometer to get it out far enough.
Who to Change engine check light bulbs on a 1996 BMW 318i?
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
Not enough info - WHAT bulbs?
HOW DO I CHANGE LIGHT BULBS