Yes it's difficult and you need a couple of special and expensive tools.
what tools are needed
No, no special tools needed, just common hand tools.
No special tools needed.
it needs to be taken to shop , because there are special tools you need to change. i on a 1998 ford tuuck. the special tools to change it with cost about $80.00.
Go to a Specialized workshop, don't try to make it on your own, it is very difficult to set the timing properly without special tools
Not really other than a Torx 40 or 45 socket. These are pretty standard on front brakes these days, so you should be able to find them and not have to spend a fortune.See "Related Questions" below for more about Taurus brakes...
more infoAre you talking about front or back? The front pads are easy to change. The rear may require a little more work and some special tools. what kind of special tools
You do not need any special tools to change out the auxiliary fan switch on a 1989 Volvo 780. The wrenches you normally use are sufficient.
if you have never DONT do it yourself let a prof mech do it and yes you need special tools
If you don't have the tools and/or know-how, it could be very difficult.
nope just standard air tools
What year? It may require special tools.
With a bit of practice and no special tools required, it is not difficult to apply Ralph Lauren paint textures, such as suede or stone.
Jack-up, wrench, anyway, it's very difficult to change it
yes $100 from snap on
60,000 miles , special tools required
Yes, a special tool is required to compress the caliper pistion.
Not without specialized tools and equipment that a gunsmith has. Trying to do it with ordinary tools will destroy the frame or barrel.
About an hour or so if your also changing the plugs and have the tools and parts ready.
Changing the tie rod is not difficult, but requires an alignment and special tools. Would suggest having a profesional do the work due to the chance of improper install is very important to the steering of the car.
It is an involved task that takes some training and special tools to do properly. I encourage you to let a pro do it.
do not do this yourself if you dont have special tools it is too dangerous and aggravating i do everything myself but not this
Take to garage as special tools required to lock cams and crank