Headlights Tail and Brake Lights
Honda Civic LX
Honda Pilot

How do you change the map light bulb on a Honda Pilot?

Top Answer
User Avatar
Wiki User
2010-07-15 21:25:58
2010-07-15 21:25:58

use a tiny screwdriver to pop off the plastic piece that you push to turn the light on, then the bulb just pops out

1. Find the "hinged" side of the plastic light cover (the side that doesn't go up and down.)

2. Insert the tip of a flat-head screw-driver between the plastic light cover and the surrounding frame. The tip should be on the side of the hinge, about 1/4" away from either corner. The cover will pop right out.

3. Use your screwdriver to pop out the light bulb.

My EX-L required a 12V-8A bulb.


Related Questions

User Avatar

The "BRAKE BULB" light means that a brake bulb is not working and may require replacing.

User Avatar

there are many light bulbs on the Honda accord.. what light bulb?

User Avatar

Hi, I just changed the whole fixture for the third light. There are two caps on each side of the fixture. With flat screw driver, take off the caps and take out the screws. The light fixture will come out and twist the socket of the light bulb. Now you can able to change the light bulb. I hope this will help you all.

User Avatar

To change the brake light bulb on a 1999 Honda Passport find the light housing located in the trunk. Find the plastic covers for the lights and remove them. Pull the bulbs out carefully and replace them.

User Avatar

To change the front signal light bulb on the 1999 Honda CRV, pry up the fender fastener to expose the bulb socket. Twist the bulb socket 90 degrees and remove from the assembly. Turn the burnt bulb counterclockwise and pull out. Replace with new bulb.

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.