Electric Windows
Honda Civic
Honda Civic SI

How do you change the motor of a window on a 2000 Honda Civic SI?


Top Answer
User Avatar
Wiki User
2011-11-10 21:45:49
2011-11-10 21:45:49

Tools Required:


Extension (Minimum of 4 inch)

10mm Socket

Phillips Screwdriver (cross-point)

Flat Screwdriver

Remove door interior trim panel. Reconnect the window control switch. Roll the window down to the access hole for the front window support. Loosen the two window support bolts. (Do not remove completely, the window will fall) After you have loosened the two bolts, hold onto the window so that it does not fall. Slide the control bar to the rear of the door so that the window can be removed. Turn the window to a 45 degree angle and slide it out off the door. Unplug and remove the window control switch and disconnect the electrical connector/harness. Remove 2 bolts on the rear window leveler bar. Then remove the 2 bolts on the rear of the window motor mount. Loosen the front 2 bolts on the window motor and slide the entire assembly upward and out of the bolt hole inserts. Remove power window motor out of the door. Install the new motor/regulator in reverse order.


Related Questions

User Avatar

Remove the inside door panel. Remove the wiring harness from the window motor. Remove the track linkage. Remove the window motor retaining screws. Reverse the process to install the new window motor.

User Avatar

don't just replace the window motor replace the whole car. get a hybrid or something

User Avatar

yes, the motors are interchangeable.

User Avatar

what year and model Honda civic? what series motor? D, B,

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.