remove engine should be pretty straight forward after that
The MOST COMMON PROBLEM with that engine is that the intake manifold gasket BLOWS / LEAKS water into the engine crankcase and mixes with the oil. Replace the intake gasket and FLUSH The engine oil and change the oil filter SEVERAL TIMES Untill engine cleans up.
How do you change a tire on a 2000 chevy suburban
what is the preceger for replacing the head gaskets on a 1993 chevy suburban 4x4 350
Normally the chain will last the life of the engine and is replaced when the engine is overhauled.
Yes it will, there the same.
Where is the thermostat on a 1997 chevy suburban and how do you change it?
Remove the cylinder head from your 1992 Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and reverse the process.
As per www.totalrecallinfo.com there is only 1 recall on this item, but not on the intake gasket.
You will need to remove the cylinder head from your Chevy Lumina engine. Remove the head gasket and clean the surface. Put the new head gasket on and return the cylinder had to its original position.
No
That is a very common problem with the Vortec engines. You must REPLACE the Intake gasket and then change the oil and filter a few times in a roll after letting the engine run a few minutes each time until you get the engine oil to clean up.
The PCV valve on a 2002 Chevy Suburban 6.0 liter engine is located in the engine. You cannot miss the valve.