On some cars you open the hood, and the light socket will be right on the inside behind the fixture itself. A quarter turn counter clockwise and pull will remove the socket. Then push in while turning a quarter turn counter clockwise again will release the bulb, or on newer ones, you just pull them out as they are the spade type. On some cars you will have screws holding the lens assembly in, and it would have to be removed to replace the bulb. Then still on others, you would reach underneath the bumper.
To replace the parking light bulbs, remove the screw on top of the headlight and pop out the clearance light. The parking light bulb will be accessible after this removal.
Headlight bulbs, high and low beam, parking light bulbs, signal light bulbs, brake light bulbs, dash light bulbs, interior light bulbs, plate light bulbs, etc.
To change the park light on a Subaru Impreza prop the trunk lid open and locate the taillight housing. Remove the plastic cover and the bulbs for the parking lights. Replace the bulbs.
Parking / Running light bulbs are inside the headlight housing.Refer to the "Related Questions" below for specific instructions by model year groups.
The light is held by clips. You can remove the housing by using your fingers or a small screw driver. Once you have the housing out, you should be able to easily replace the light bulbs. The bulbs come in pairs and cost about 5 bucks.
how do i change a parking light bulb on a 2003 hyunadi accent
If all other lights work then make sure that the parking light bulbs are good. Check for a parking light fuse and relay, to insure that the work properly.
Who to Change engine check light bulbs on a 1996 BMW 318i?
Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
Not enough info - WHAT bulbs?
HOW DO I CHANGE LIGHT BULBS
= Answer = you dont