Serpentine Belts
Chevy Silverado
1995-2005 Chevy Cavaliers

How do you change the serpentine belt and belt tensioner on a 1997-2005 Chevy Malibu V6 3.1L?

1

We need you to answer this question!
If you know the answer to this question, please register to join our limited beta program and start the conversation right now!

Related Questions

User Avatar

remove the belt. then in center of the tensioner is a bolt that goes into engine. remove this bolt. then tensioner should come off.

User Avatar

You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.

User Avatar

You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.

User Avatar

Begin by loosening the tensioner pulley on your 2000 VW. The serpentine belt will become loose when the tensioner pulley is loose. Remove the old serpentine belt and put the new serpentine belt on. Tighten the new serpentine belt with the tensioner pulley.

User Avatar

Loosen the tensioner pulley on your 1988 Chevrolet Corsica. When the tensioner pulley is loose the serpentine belt will easily come off. Put the new serpentine belt on and tighten the tensioner pulley.

User Avatar

Loosen the tensioner pulley on your Mercedes-Benz. The serpentine belt will become loose and can be removed. Put the new serpentine belt on and tighten it with the tensioner pulley.

User Avatar

take the serpentine belt loose and there is 1 bolt holding the complete belt tensioner onto the engine, take the bolt out and it's off.

User Avatar

Loosen the tensioner pulley on your 2004 VW Jetta. The serpentine belt will become loose and can be removed. Put the new serpentine belt on and tighten the tensioner pulley.

User Avatar

You will need to loosen the tensioner pulley on your 1994 Pontiac Grand Am. The old serpentine belt will come loose and can be removed. Put the new serpentine belt on and tighten the tensioner pulley.

User Avatar

Loosen the tensioner pulley. Pushed the tensioner pulley to the left. The serpentine belt will come loose. Remove the belt. Reverse the process to install the new serpentine belt.

User Avatar

You can loosen your 1995 Chrysler Town and Country serpentine belt by loosening the tensioner pulley. Push the loosen the tensioner pulley to the right. The old serpentine belt can be easily removed. Put the new serpentine belt on and tighten the tensioner pulley by pushing it to the left.

User Avatar

I have a 3.1L and there is just 1 screw that holds the tensioner in place.

User Avatar

You will need to loosen the serpentine belt tensioner pulley on your 2002 Chevrolet Avalanche. Slide the belt tensioner to the right. The serpentine belt will become loose and can be removed. Reverse the process to install the new serpentine belt.

User Avatar

You will need to loosen the tensioner pulley on your 1983 Chevrolet S 10 pickup truck. Slide the tensioner pulley to the left. The serpentine belt will become loose. Put the new fit serpentine belt on and tighten the tensioner pulley by sliding it to the right.

User Avatar

Turn the Tensioner bolt clockwise (to the right)and the tensioner itself will move causing slack in the belt.

User Avatar

no, unless the tensioner is bad, other than that just the belt.

User Avatar

how do i lossen the belt tensioner on a 2001 Hyundai Sante fe to replace the serpentine belt

User Avatar

Put a wrench on the tensioner. Push it slack. Replace the belt while holding the tensioner in the slack position.

User Avatar

push back on tensioner, then re move belt.

User Avatar

This is the escort forum not the E 150 forum.

User Avatar

The tensioner/tensioner pulley is located on the passenger side of the motor and hold the tension on the serpentine belt. In order to change the serpentine belt you must relax the tension with a breaker bar or equivalent. We have more info, including diagrams at our enthusiast forum, at www.trailvoy.com

User Avatar

The power steering unit and the alternator are both driven by the serpentine belt. Loosen the tensioner pulley and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.

User Avatar

I don't have the exact car model diagram but try this http://www.gti-vr6.net/library/engine/repl_serpentine_belt_NEW.html

User Avatar

buy a belt, loosen the tensioner, replace belt

User Avatar

You can change the serpentine belt on your Chevrolet trailblazer, by loosening the tensioner pulley. With the loosened tensioner pulley the belt will come off easily. Tighten the new belt with the tensioner pulley.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.