answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2014-08-28 00:13:56
2014-08-28 00:13:56

Remove the spark plug wires from each spark plug. Turn the spark plug out with a 5/8 deep well socket. Reverse the process to install the new spark plugs.

001
๐Ÿฆƒ
1
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


how to change spark plugs on a 2004 Hyundai sonata 6 cylinder


how to change spark plugs in 2004 honda civic lx?


undo the console on top of the spark plugs and they are 2 each 2 plugs they are 16 spark plugs in total


how many spark plugs in the v6 2.7l 2003 Hyundai sonata?


Changing spark plugs is an easy task. Disconnect the battery, disconnect the cables, remove the old spark plugs, put in the new spark plugs, reconnect the cables, and reconnect the battery.


A 2004 Hemi has sixteen spark plugs.


The spark plugs on a 2004 Pontiac Vibe are changed by removing the plug cover, disconnecting the spark plug wires, and taking out individual spark plugs using a deep wall socket. New plugs are then set to the proper gap and torqued into place.


Disconnect the battery, remove the spark plug wires and boots, and remove the old spark plugs. Toss out the old spark plugs, put in the new spark plugs, replace the spark plug wires and boots, and connect the battery.


Remove the coil on top of the plug, and there is the spark plug.


Remove the spark plug wires from the spark plugs, use an extension for your Allen wrench, and use a spark plug socket to remove the spark plug.



The spark plugs should be changed every 60-80,000 miles.


Remove the upper intake, then proceed as with the other plugs.


It can be complicacated since on some models the spark plugs are difficult to get to but I would recommend to find the spark plugs first and then double check to make sure you know where they are.


4.7L has 8 spark plugs. 5.7L has 16 spark plugs.


How do you change the lower ball joints on an 2004 envoy


Locate and install spark plugs for 2004 navigator




to change the spark plugs there are 5 steps to this: step 1: remove spark plug wires. step 2: find the right size spark plug socket and rachet. step 3: losen spark plugs until they come out. step 4: install new spark plugs into cylinder, but make sure not to cross thread them it is very easy. step 5: replace spark plug wires on to new spark plugs. and youre done


If it is a Hemi - it has 16 Spark Plugs if it is a regular 8 cylinder it has 8 Spark Plugs


you HAVE to remove the intake manifold to change the spark plugs. If you aren't comfortable with this, you should take it to an authorized repair shop and have them do it. It is a 3.5 rocks out of 5 on the hardness scale.


Remove the spark plug wires from your 2004 Chevy Malibu spark plugs. Remove the old spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.


Disconnect the battery, remove the spark plug wires and boot covers and remove the old spark plugs. Put in the new spark plugs, leave the correct gap size, replace the boot covers and wires and connect the battery.


your bst bet is to get to them through the front wheel wells.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.