Spark Plugs and Wires

How do you change the spark plugs on a 1992 Toyota Previa?

575859

Top Answer
User Avatar
Wiki User
2011-09-13 00:26:19
2011-09-13 00:26:19

Remove the passenger side seat (4 bolts) and the trim panel that holds the carpet down at the bottom of the doorframe. then pull the carpet back. This will expose the right-side engine access panel. Unbolt the panel (8-10 bolts), remove it, and you will see a black cover with 3 10 mm bolts in it. remove the bolts and shield, then the plug wires and voila - spark plugs are exposed!on a European model you ofto remove the driver seat.

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

how do I change spark plugs on 2002 Toyota tacoma v4

User Avatar

How do I change spark plugs on Toyota rav 4 2003

User Avatar

How do I change spark plugs in 2009 Toyota Corolla? whaT TOOLS I NEED

User Avatar

position of spark plugs on 2003 Toyota coralla

User Avatar

How do you change spark plugs in a 6 cly Toyota Camry?

User Avatar

To change spark plugs on a 1994 Toyota Camry, remove the black shafts. The spark plugs are down the four holes. Use a socket set with extension to reach the spark plugs. Replace old spark plugs with new ones.

User Avatar

Remove the passengers side front seat. remove the metal engine cover after pulling carpet back, remove the long metal cover covering the spark plugs and wires.

User Avatar

To change the Spark Plugs on a Previa (1991-1996) you have to remove the passenger front seat, lift the carpet and then you will find a cover on the floorplate that has to be removed. Once the floorplate cover is off you will see the engine. There is also a small cover over the spark plugs and wires that has to be removed. The 2.4 liter petrol engine uses small 16mm spark plugs and a small 16mm socket will be needed to replace the plugs.

User Avatar

There is an article with video on how to change spark plugs at ; http://www.carbasics.co.uk Look in their 'how to' section.

User Avatar

Remove the old plugs, install new plugs.

User Avatar

How to change sparks on Toyota Rav 4 2003

User Avatar

when do you change spark plugs

User Avatar

A 2007 Toyota Prius has 4 spark plugs.

User Avatar

You can change the spark plugs on the 1997 Toyota Tacoma yourself. Remove the ground wire and spark plug wire. Remove plug. Replace the plug with a plug made specially for your model car.

User Avatar

When changing the spark plugs on a 2006 Toyota Tacoma make sure the vehicle is off. Use a spark plug socket and pull the spark plug wires. Remove the old spark plugs and properly space and install the new parts.

User Avatar

Factory recommendation to change the spark plugs on a 2000 Toyota Avalon is 120.000 miles.

User Avatar

could be , bad plug wires, bad distributer cap more than likely to be a bad coil or a bad condensor

User Avatar

No. Remove the passenger seat, remove the cosmetic panel under the passenger door, peel of the carpet and unbolt the access cover. Younow can see the engine head where your spark plugs are.

User Avatar

The 2000 Toyota Avalon spark plugs can be located on each side of the engine. The spark plugs will be near the bottom of the engine. There are three spark plugs on each side.

User Avatar

spark plug torque for a Toyota 2.4 is 95 inch/lbs

User Avatar

spark plugs are under drivers seat , what a pain but easy . four 15mm bolts on seat 2 on handbrake then lift carpet the rest are 13mm bolts about 10 of them , then remove cover , under that there is three 10mm bolts which holds a plastic cover on which hides the plugs , u will need a 16mm spark plug spanner :O)

User Avatar

if you have ignition coils you have to remove them and the intake tube (3000) then you can take the spark plugs out

User Avatar

http://www.4x4wire.com/toyota/maintenance/tacoma_4runner_30k/maintenancep3.html#plugs


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.