simple answer. I hope you don't have aftermarket wires, cause they will break off and you will need long needlenose pliers to remove the clip that attaches to the spark plug and/or the rubber boot from the wires. if not, then we continue. On a cold engine twist and pull off the wires one by one, don't worry, Toyota wires are marked 1,2,3, and 4 . Insert the 5/8 socket with extension down the tube and remove slowly. pull the plugs out from the soaket and put some lube on the new ones to be installed. hand screw the new plugs on and then tighten with ratchet another 1/4 to 1/2 turn not too tight though. You might think about replacing the cap/wires and rotor (I strongly recommend Toyota parts to avoid problems with aftermarket parts) Good luck
How do I change spark plugs in 2009 Toyota Corolla? whaT TOOLS I NEED
position of spark plugs on 2003 Toyota coralla
There is an article with video on how to change spark plugs at ; http://www.carbasics.co.uk Look in their 'how to' section.
Change the valve cover gasket.
Corollas has a four cylinder engine, it means it has 4 spark plugs.
Take it to a Toyota dealership
how do I change spark plugs on 2002 Toyota tacoma v4
How do I change spark plugs on Toyota rav 4 2003
In the cylinder head, on top of the engine block.
How do you change spark plugs in a 6 cly Toyota Camry?
To change spark plugs on a 1994 Toyota Camry, remove the black shafts. The spark plugs are down the four holes. Use a socket set with extension to reach the spark plugs. Replace old spark plugs with new ones.
The correct spark plug gap for a 2000 Toyota Corolla is .043 inches. Most spark plugs are pre-gapped, but its best to check before installation.