Headlights Tail and Brake Lights
Pontiac Vibe
DIY Projects

How do you change the tag light on a 2003 Pontiac Vibe?

454647

Top Answer
User Avatar
Wiki User
Answered
2011-10-20 17:02:27
2011-10-20 17:02:27

I just did it. I broke the lamp holder which cost 31.00 at the Pontiac dealer and 21 at the Toyota dealer. I suggest you first remove the elector corrector which easy. I suggest you pop the entire rectangular light assembly out by pushing on the relase flange (this is reached from the inside after removing the access panel) and pull the light box out from the outside. Once removed, remove the connector assembly, install the new light, reinstall the the connector assembly with light, connect the power, and lastly reinstall the entire assembly into the body of the hatchback door.

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


I understand that the gasoline filter on a 2003 Pontiac Vibe is in the fuel tank, and seldom needs replacement


No such animal . . . Vibe was released in 2003


You need to replace the DRL (Daytime running light) Module


The 1.8 liter four cylinder in a 2003 Pontiac Vibe has a timing CHAIN


is there a video on how to change the starter for a 2003 vibe


The one location to where the fuses for the air conditioner can be on a 2003 Pontiac Vibe. The fuses for the air conditioner will be in the fuse panel located in the engine compartment.



This is a link to the serpentine belt routing diagram that worked for my '04 Pontiac Vibe. As far as I know, this is the routing for all Pontiac vibe base and GT models. http://forums.genvibe.com/zerofile/1436belt.jpg


Pontiac Vibe was created in 2002.


The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.


Changing transmission cables on a 2006 Pontiac vibe


where is the internal fuse box on a 2008 pontiac vibe


A Pontiac Vibe is a safe venhicle according to Consumer Reviews.


The Pontiac Vibe was first introduced in 2002, as a 2003 model. The newest 2010 model (1.8L) gets about 26 mpg in the city and 32 mpg on the highway.


Remove carpet inside trunk that covers tail ligh assembly, then unbolt tail light assembly, remove the assembly and bulb fixture of the bulb you want to replace, replace bulb and re-install in reverse order.


first try cleaning your mass air flow sensor.





where is the plug to drain the oil in a 2005 Pontiac vibe


The Pontiac Vibe's first model year was 2003. Because its model year was 2003, that means they were first produced and sold in mid-to-early 2002.


It is possible you have a bad alternator, or a bad connection at the battery. You can take the car by your local auto parts store and have the altornator checked.


The plastic cover (P-R-N-D-2-L) can be carefully pried out .....giving access to the bulb. You will need needle nose pliers to pull the old bulb out.



Your manual should tell you. My 2005 has a towing capacity of 1500 lbs.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.