Change brake light bulbs Just remove the rear license plate. You can change the backup lights and brake light easily.
Remove the two screws that hold the lens on, remove the lens and change the bulbs.
Remove the light assy and turn the bulbs counterclockwise.
If you're positive it's not the bulbs (you know this because you checked them with a meter or tested the outlet with a test light maybe) or switch, check it out for a bad ground.
cavalier break lights not workin no indicators neither help fuseis gud do i need to change panals were bulbs go or what????????????
The # is 1157 bulbs.
3 things come to mind...Fuse, Bad Bulbs, Brake Light Switch. Whip out the volt meter and test it at the bulb socket for 12 volts when your buddy pushes the brake. Check the fuse, bad bulbs first.
No...the 99 has 2 bulbs and the 01 has 1 bulb
Check the bulbs first. I had the same problem on a 94 Oldsmobile and it was the dimmer switch. Replaced that and fixed the problem Check the bulbs first. I had the same problem on a 94 Oldsmobile and it was the dimmer switch. Replaced that and fixed the problem
Check the fuse for the tail lights. Also check the bulbs.
Turn signals are mounted on a Chevy Cavalier just like a regular head lamp is. The difference between the units is the bulbs are smaller. Open the hood and find the lamp brackets. Unplug the old brackets and connect the new bulbs.
Check sockets and grounds
Check the fuse, check the bulbs, then check the brake light switch.
Remove 2 screws that hold lens on, remove lens, then you should be able to change bulbs without any problems
The bulbs are burnt out.
Are you blowing fuses or are the bulbs blowing? Blowing fuses would be a sign of any wires or metal contacts in your brake circuit grounding out or shorting on themselves. You'll have to check all of the wiring in your brake light/switch circuit to be sure.
Bulbs burned out or fuse and or relay popped
To change the brake lights on a 1997 Volkswagen Polo first locate the brake light housings in the trunk. Remove the plastic covers and unlock the bulbs. Remove the bulbs and install the new brake lights.
From inside the trunk pull back the carpet and get access to the tailight assembly. Remove the fasteners on the tailights then unscrew the bulbs and replace.
Check the fuses, Check the bulbs, Check the brake light switch, In that order.
Check the bulbs, Check the fuse, Check the brake light switch, in that order.
Check fuse, check bulbs, check brake light switch, in that order.
brake light switch, it is typically located above the brake pedal somewhere on the brake pedal arm
id cheack your brake light switch. its rightbehine your brake peddle it could be that malfunction, its a chap part to change $15 or less but u could also check your fuses if the bulbs are still good due to the bulbs having 2 separate filiments one for runin light and for brake..
i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs