First, is there a chain or belt? Secondly run down to your local parts store and pick up the haynes or chilton repair manual for a few bucks and follow the step by steps given there. good luck.
****See what engine code you have. If it is a Maxima SE (DOHC) (VE30DE engine code) you will have a timing chain instead of belt and probably no distributor (stupid coil packs). The GXE (SOHC) has the VG30 engine which has the belt...
Also, I do like the Haynes Manuals better, but both state: "This manual does not contain info specific to the VE30DE engine...MAKE SURE YOU SPECIFY AT THE PARTS STORE, I KEPT GETTING THE WRONG PARTS, EVEN Nissan ALMOST DID THIS, GOOD THING I LOOKED AT THE COMPUTER...
my 92 Nissan has a belt make shure that its abelt and not a chain
the water pump is in the middle of the timing cover the crank pulley and timing cover has to come off
depends on the engine if its a single over head cams it has a belt if a dual over head has a chain
I need to find where are my vacuume hoses on a 1992 Nissan maxima se...
what are the torque specs and sequence for a 1992 Nissan maxima manifold
it is time to change bearing on that pulley
its in the gas tank
in the distrubator
inside the transmission
The 1992 Nissan Maxima diagnostic socket location can be found on the bottom of the drivers side dashboard. The diagnostic socket will be to the left of the steering column.
In order to have complete combustion you need only a few things.-Spark-Fuel-Air-Compression-Correct TimingAny of these things could cause a misfire.A common problem with the 1992 Nissan Maxima is the fuel injectors. I would check the resistance on them and check the wiring harness.
no because the maxima is a 5 lug and the sentra is 4 lug
it should be in the distrubator
autozone cheackerauto parts
The size of these hubs is 5 by 114.3
usually blue smoke is oil
1992 nissan maxima security light flashes when open door and car is not starting cranks well, cleaned battery terminals.