Remove the starter (3 bolts) then you will see the shift rod under the carburetror. remove the screw connecting the shift rod. there are 5 bolts holding on the lower unit remove the bolts and the lower unit can be removed. then you cam remove the water pump housing and replace the impeller.
possible fins/impeller blades on water pump are coroded away or impeller is come loose from water pump shaft. In a lot of racing applications we take a new water pump apart and weld the impeller to the shaft before installation
typical Audi problem. The water pump is stuffed. Impeller is free wheeling on its spindle. $$$
The 1998 model, 9.9 hp Evinrude outboard, will perform well on a 50:1 ratio. This is roughly, one pint of 2 cycle oil, to six gallons of fuel.
if it is a v6 it would be the notorious plastic impeller water pump...they crack off the shaft internally... Scuba
You are looking at 50:1. Hope that helps.
How do I change a water pump on 1998 dodge ram v10 2500. I need a picture to
according to the dealer this engine weighs 288 lbs
As per the owners manual it weighs 109 lbs.{49kg}
how tall is a 1998 evenrude 35 hp outboard motor
The average time it takes to change the water pump on a 1998 Dodge Avenger is six to ten hours.
behind the timing cover you should change the timing belt when you change water pump.
Remove the water return line from your 1998 Chevrolet pickup truck water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.