How do you check the clutch fluid on a 72' Datsun 210 station wagon?
on the left side of the engine compartment there are two master cylinders one has 2 reservoirs that is the brake MC the one next to it with one reservoir is the clutch MC pull the stopper off the top and look inside at the level.
Where do you check the clutch fluid and how do you know if your clutch went out on a 1993 Nissan truck?
There are two normal causes. The clutch is worn out or there is a leak in the hydraulic clutch slave or master cylinder. To check the clutch, press the clutch slave cylinder down. If the clutch slave cylinder bellows compresses down to the slave cylinder, the clutch is worn out. Check the clutch master cylinder fluid level. if this is low, then the clutch cylinder need to be checked. To check for a hydraulic leak…
What can the problem be when a 91 Nissan sat for a long time and the clutch pedal is stuck to the floor?
The clutch is non-adjustable. It uses hydraulic fluid to release the clutch. If you are experiencing a dragging clutch, check your plates for warpage. This bike uses a 'slipper' type clutch so having the correct plates in certain places is important. If you have not changed your plates and they are the originals, check that the clutch fluid doesnt have air in it.
What is wrong if there is no resistance in the clutch pedal for 1996 Mitsubishi Galant with manual transmission?
it means you have no clutch fluid(brake fluid) or that you possibly have a leak in the line somewhere or that it needs to be bled.might possibly be the master or slave cylinder.first check the clutch fluid resivor.if its empty then you need to top it off and bleed the line @ the master cylinder then at the slave cylinder.then find out why you have no fluid...the clutch fluid resivor is the smaller one of…