The ALDL port is located on the driver's side, under the dash. You will need a GM Tech1 (or compatible) scantool to retrieve codes from either a 1994 or 1995 Beretta. This is because GM was in a transitional period between 1993-1996 to comply with the government mandated OBD-II system. The diagnostic components in those years are a combination of OBD-I and OBD-II parts, and cannot be scanned with a standard scantool.
Unfortunately, unless you know someone with such a scantool (GM Tech1, Actron CP9150, etc.), you will need to go to a GM dealer to have your codes read.
follow the link for your wiring codes
Some Haynes manuals have ECU codes
you check the system for trouble codes.
Chrysler does not have reset switches. You need to check for trouble codes with a scan tool.Chrysler does not have reset switches. You need to check for trouble codes with a scan tool.
if you are looking to reset a check engine light or any trouble codes, you will need to have it done with an OBD2 handheld scanner.
yes, and what codes are you asking about "check engine" or anti lock radio codes?
There are dozens of codes. Be specific as to what code you are getting.
There are several ABS trouble codes for a Chevrolet automobile. The most common ABS trouble code is; error code 628.
Either unplug the battery for 10 minutes, or go to your local auto store (Orielly or Auto Zone) and borrow their scanner to clear the codes. Ask if you require assistance.
If it is OBD 1, yes.
An emission or performance problem will cause the Check Engine Light to illuminate. You can take your vehicle to Auto Zone and have the computer scanned for trouble codes. There is no charge.
If you can not read codes with a scanner you have a wiring problem.
Check the fluid level. Check the linkage. Check all computers for trouble codes.
allot of reasons check the carb. check for vacuum leaks. check the timing. check the comp codes.
Trouble code P0601 means:Internal control module memory check sum error Trouble code P0602 means:Control module programming error
See link below for a complete list of trouble codes.
pretty much instantly. As soon as the codes are cleared the check engine light goes off and vice versa, unless there still is trouble. In this case the codes won't clear until the trouble is repaired.
Trouble code P0128 means:Coolant thermostat (coolant temp below thermostat regulating temp)
You need an OBDII scanner to retrieve the trouble codes.
You must use a Diagnostic code scanner that can erase trouble codes.
It has set a trouble code. Have the codes pulled at a autozone or oreilly auto parts.
Chiltons owner manual has complete eccm trouble codes
That depends on what part of the system is malfunctioning. You will probably need to start by using a scanner to check the cluster for trouble codes.That depends on what part of the system is malfunctioning. You will probably need to start by using a scanner to check the cluster for trouble codes.
A scan tool or code reader is required to read the trouble codes on a 2001 Chrysler Town and Country.