Asked by Andy Blackwell Uncategorized
How do you clean valve vacuum sweet?
We need you to answer this question!
If you know the answer to this question, please register to join our limited beta program and start the conversation right now!
Asked in Nissan Altima, Nissan Sentra
2001 Nissan altima gxe were is the evap vacuum cut valve bypass valve?
Asked in EGR Systems, Ford Expedition XLT, Ford F-150
How do you clean an egr valve?
Depends on the EGR valve. A good lot of them can be cleaned and reused. New ones can costs hundreds of dollars. The EGR valve works by routing a small amount of the exhaust gases back into the combustion chamber. See the Related link for more information. To clean the EGR valve, you may be required to remove the vacuum hose and clean out the carbon deposits.
Asked in Geo Prizm, EGR Systems, DIY Projects
How do I remove and clean the EGR Valve on a 1997 Geo Prism 1.6L 4cyl?
Asked in Ford Ranger, Ford E-250 Van, Ford Ranger XLT
Is there a thermal vacuum valve on a 1999 Ford Ranger?
Where is the vacuum modulator valve in a 2001 impala?
Asked in Nissan
How do you correct a code P1441 on a 1996 Nissan pickup?
This usually indicates a faulty Evaporative Emission (EVAP) Vacuum Cut Valve/Bypass Valve. 1. Verify battery voltage to the EVAP vacuum cut valve bypass valve on the Black/White wire with the key ON. 2. Verify the Green/White ground wire for the EVAP vacuum cut valve bypass valve is good all the way to the ECM. The Green/White wire goes to terminal 117 on the ECM. 3. Verify the EVAP vacuum cut valve bypass valve is closed (can not blow through it by mouth) when the EVAP vacuum cut valve bypass valve is de-energized. 4. Verify the EVAP vacuum cut valve bypass valve opens (can blow through it by mouth) with the valve powered up and grounded. 5. Check the EVAP vacuum cut valve to verify it allows flow only one way.
How do you check out the heater bypass valve with a vacuum gauge in an 89 Plymouth Acclaim 2.5L?
Asked in Cars & Vehicles, Ford Explorer
Where is the vacuum control Valve located on a 2002 Ford Explorer?
Why does my 2001 Chevy blazer service engine soon light come on?
Asked in Crankcases and PCV Valves, DIY Projects
How do you change the PCV Valve on your 2001 Yukon XL?
Asked in Brakes and Tires
What is the problem when there is no brake pressure when car is turned on?
How do you check to see if you have vacuum on the modulator valve?
Asked in EGR Systems, Vauxhall
How do you clean egr valve on vauxhall zafira 1600?
Asked in Auto Parts and Repairs, Chevy Cheyenne
Where is the power booster check valve located on a 1995 Chevy 1500?
Asked in EGR Systems, Chevy S-10
What is an EGR vacuum solenoid on a 1991 4.3 s10 and what it does?
Asked in Ford Expedition XLT
How do you remove a PCV tube from a 2003 Ford Expedition XLT?
PVC from where? You have to be more expecific... Need more info... The PVC valve is located in the right , passenger valve cover. test and replace involve same procedures. remove valve, still connected to hose, from valve cover. hold finger over end of valve. if vacuum is felt ,it is OK, if no vacuum is felt, remove valve from hose and feel for vacuum. if vacuum is felt at intake hose, then you must replace the Positive Crankcase Ventilation valve (PVC) valve. valve comes off cover by just pulling. valve comes off hose same way.