With a scan tool after repairing the cause of the fault code.
With a scan tool after repairing the cause of the fault code.
With a scan tool after repairing the cause of the fault code.
After reading the code, fixing the cause, you clear the code with a scan tool.
dissconnect the battery overnight to clear the codes. if that does not work then u have more problems. or you can hook it up to a scanner to cear the codes but they are high. you might take it to autozone and they will cear them for u
If the check engine light stays on for the Nissan Pulsar n16, you would need to check the engine in order to clear codes. You can take the car for service and the problem will be diagnosed and restored to normalcy.
Take it to advanced auto parts and have them clear the codes ... its free.
You use the test monitor and scroll down to clear code
Try disconnecting battery for about 10 mins. or have vehicle scanned to determine problem or clear codes
if your take it to a autozone tell them you have a check engine light and they will tell you whats wrong if anything and reset it take it to autozone and tell them your check engine light is on and they should reset it
Go to auto zone and have the codes read for free. DISCONNECT THE BATTERY I disconnected the battery and the light did not reset On my '95 maxima I have to leave the battery disconnected for ~24 hours to reset the engine lignt. On my 1987 Maxima there is a button to push to reset the light. It is located underneath the passenger kick panel. On my 1999 Maxima I had to disconnect the battery for 24 hours : Go to autozone and have them clear it, easiest way, go to yoru local mechanic, he should have a obd scan tool, pay to have him remove it.
Disconnect the negative (-) cable from the battery for few minutes, this will erase also your preset radio stations. Your Bluetooth settings remain untouched.
You can disconnect the battery to reset the light, or if you don't want to lose your radio presets, etc... then go to Autozone or similar parts store to have them clear the codes. They generally will do this for free, and can also diagnose what is causing the light to come on.
Watch the following video. It give a clear step-by-step overview of the process. http://www.youtube.com/watch?v=hlp2KuWpoFI
GO TO A AUT ZONE TELL THEM THE CHECK ENGINE LIGHT IS ON THEY WILL COME OUT AND HOOK SOMTHING UP TO IT . THEY WILL GIVE YOU A LIST OF WHAT COULD BE THE PROBLEM AND ASK THEM TO CLEAR IT, THEY WILL DO ALL THIS FOR FREE- HOPE THIS HELPS- AMBER