answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2014-03-30 09:51:17

43,560 square feet per acre: 20 (acres) x 43,560 = 871,200 square feet

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


20 acres = 871,200 square feet


20 acres is 871,200 square feet.


20 acres is 871,200 square feet.


20 acres = 871,200ft²


20 acres is 871,200 square feet.


In terms of square footage, 20 acres = 871,200 square feet.


A square with an area of 20 acres has a perimeter of about 3,733.5 feet.


2o acres is 871,200 square feet.


20 acres comprises 871,200 square feet.


43,560 square feet - 1 acre 87,120 square feet = 2 acres 871,200 square feet = 20 acres


871,200 ft2 equates to 20 acres.


1 acre = 43 560 square feet26 feet x 80 feet = 2080 square feet = 2080/43560 acres = 0.04775 acres (slightly less the 1/20 acre)


As asked, it is impossible to answer as acres are a measure of area (and are a square unit) whereas miles are a measure of length (and a linear unit). However, if you meant: are 100000 acres less than 20 SQUARE miles, then: Convert to the same units, then a comparison can be made: 1 square mile = 640 acres → 20 square miles = 20 x 640 acres = 12,800 acres < 100,000 acres → No, 100,000 acres are not less than 20 square miles.


A 20-acre square lot has a perimeter of 3,733.52 feet.


50 ft * 20 yards = 50*60 = 3000 square feet = 3000/43560 acres = 0.069 acres, approx.


Answer: 20 m² = 215.278 ft²


One can convert square meters to square feet in a couple of steps. 1 square meter is 10.763 square feet. If one has 20 square meters, one must multiply 20 by 10.763 to get the total amount of square feet.


'Square acres' is redundant. Just say acres. One square mile has 640 acres. 20 acres is 1/32 of a square mile


1 acre = 43,560 square feet If this plot is rectangular ... its corners are right angles ... then Area = (20 x 1,320) = 26,400 square feet = (26,400 / 43,560) = 0.606 acres(rounded)


1 mile = 5,280 feet43,560 square feet = 1 acreArea = (20 x 5,280) x (100) = 10,560,000 square feet = 242.42 acres (rounded)


1 acre = 43,560 square feet = 4,840 square yards-- If the given dimensions are in feet . . . 220' x 440' = 96,800 square feet = 22/9 acres.-- If the given dimensions are in yards . . . 220yd x 440yd = 96,800 square yards = 20 acres.Check: 1/8 mile x 1/4 mile x 640 acres/mile2 = 20 acresyay!


You can not convert that as 20 inches are LENGTH and Square Feet is AREA If you meant 20 square inches however then... 1 square foot is 12 * 12 or 144 square inches. so 20 square inches would be 20/144 or 0.139 square feet


20 acres is 80,937.13 square meters.


20 acres = 96,800 square yards.


20 acres = 0.03125 square mile



Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.