A Farad is the electrical unit of capacitance. Many commonly used capacitors (also known as condensors) are measured in micro-Farads (μF).
A micro-Farad is one millionth of a Farad.
To convert from micro-Farads to Farads, divide the micro-Farad value by one million.
2 micro-farads = 0.000002 Farads.
A microfarad measures electrical capacitance. A farad can be defined as the charge in coulombs, which is 1 ampere per second, that a capacitor will accept for the potential across it to charge one volt. A microfarad is equal to one millionth of a farad.
Farad is the basic unit for capacitance. The MFD is an abbreviation for microfarad, which is one-millionth of a farad. The capacitance of a 50 MFD capacitor is one 50 millionth of a farad.
Fifty millionths of a farad, abbreviated as 50 uF. Farad is the unit of capacitance. 50 microamps DC flowing for 1 second will charge a 50 uF capacitor to 1 volt.
The use of the micro- prefix for capacitance, i.e. microfarads, is common because the farad is a very large unit of capacitance and we don't normally use capacitors in that range of value.
30 microfarads
1000000 microfarad
Farad = Coloumb / Volt; solving for Coloumb, you get Coloumb = Farad x Volt. Just plug in the numbers - 1 microfarad is a millionth farad; 0.001 microfarad - if that is what you mean - is 0.000000001 Farad; wherease 1 KV = 1000 Volts.
A picofarad is one trillionth (10^-12) of a farad. A microfarad is 10^-6. Multiply your picofarads by 10^-6 to get microfarads.
1 microfarad (μF) is equivilent to one-millionth (10-6) of a farad. Therefore, 1F = 0.000001μF :)
A microfarad measures electrical capacitance. A farad can be defined as the charge in coulombs, which is 1 ampere per second, that a capacitor will accept for the potential across it to charge one volt. A microfarad is equal to one millionth of a farad.
Farad is the basic unit for capacitance. The MFD is an abbreviation for microfarad, which is one-millionth of a farad. The capacitance of a 50 MFD capacitor is one 50 millionth of a farad.
The unit of capacitor is farad. 1 farad =10 to the power of 6 microfarad and also = 10 to the power of 12 picofarad Therfore if you are replacing one picofarad capcitor into one microfarad capacitor you are increasing the capcitance to 1000000 times. If it is in an oscillator circuit you are changing the frequency drastically which will be of no use.
I imagine 2200 is the value and usual is in microfarad a one farad will be a huge capacitor to be used in electronics.
Farad is a unit of capacitance - to measure the capacity of devices called capacitors. Farad means coloumb/voltage, in other words, if the capacitor has a capacity of 1 farad, it will store a charge of 1 coloumb for every volt. This is a huge unit; real capacitors are usually specified in microfarad, nanofarad or picofarad.
1K = 1uF
Microfarad (and farad) is a unit for measuring capacitance of capacitors (in electricity). It cannot be related to horsepower. Many electric motors have capacitors to help them start under a load, though.
Microfarad is a unit of capacitance used in most electronic applications which is equivalent to one millionth of a farad. Ampere on the other hand measures the rate of electron current or flow inside an electrical conductor.