First you will need a constant current source. Do NOT connect the voltmeter to the constant current source without the resistor to be measured already connected. Do NOT use a battery, it is a voltage source. Then follow these steps to measure a resistor:
A multimeter, also called a VOM, is an ohmmeter, ammeter, and voltmeter combined in one case. A function knob can be turned to select the type of measurement to be made, such as volts, amps, or ohms. The multimeter's test lead connections to the circuit will depend on whether you are using it as a voltmeter, an ammeter, or an ohmmeter.
yes it can read both ac and dc voltage and current .AnswerThe whole point of a multimeter is that it can perform the function of an ammeter, a voltmeter, and an ohmmeter!
Just connect a resistor and a small battery in series with the galvanometer,change the markings on the meter's scale, and you have an ohmmeter.
An ohmmeter is connected in parallel to a resistor. Be sure that there is no power in the circuit when testing.
It depends on the resistance of the galvanometer and the current required to reach full scale. A 100 ohm meter requiring 1 milliampere would require 99.9 KOhms in series to become a 100 volt voltmeter.
Voltmeter connect in parallel with the circuit setting on voltmeter highest range first then to lower range. Ohmmeter we need to use the ohmmeter meter setting connect across the resistor
it can be used as a ammeter, voltmeter and also as a ohmmeter.
A. ohmmeter B. voltmeter C. ammeter D. wattmeter
Resistance is measured with an ohmmeter. A link is provided to a brief article on the ohmmeter posted at Wikipedia.Note that it is unusual in this day and age to have a device that will measure ohms and nothing else. The ohmmeter is usually included among the functions of a multimeter, and usually a digital multimeter or DMM.
check the circuit with a voltmeter to make sure the circuit is not powered
A multimeter, also called a VOM, is an ohmmeter, ammeter, and voltmeter combined in one case. A function knob can be turned to select the type of measurement to be made, such as volts, amps, or ohms. The multimeter's test lead connections to the circuit will depend on whether you are using it as a voltmeter, an ammeter, or an ohmmeter.
It can be used to form ammeter measuring the current intensity , Voltmeter measuring the potential difference , ohmmeter measuring the resistance.
yes it can read both ac and dc voltage and current .AnswerThe whole point of a multimeter is that it can perform the function of an ammeter, a voltmeter, and an ohmmeter!
Ohms are the unit of measurement for resistance, so an ohmmeter is a device that measures electrical resistance. A galvanometer measures the current flowing through the resistance, so the two are related. To convert a galvanometer into an ohmmeter, one needs an external battery.
D. A kilowatthour meter
A multimeter measures electrical properties such as AC or DC voltage, current, and resistance. Rather than have separate meters, a multimeter combines a voltmeter, an ammeter, and an ohmmeter. The two main kinds of a multimeter are analog and digital. A voltmeter measures the potential difference (voltage) between two points. the voltmeter only measures volts.
You can use a multi-meter to measure resistance. The specific portion of the meter for measuring resistance is called an ohmmeter.