Burrs.
Yes, you can use a pipe cutter to cut through the metal and then hit it with a hammer and you will get a clean break. If you don't have a pipe cutter you can rent one for only a few dollars at your local lumber yard.
cutt off the muffler, the big oval thing near the end of the pipe then buy a metal pipe and cut to the right length if needed. then weld it onto the pipe that is cut
Usually, but a saw is usually easier as the plastic is softer than metal.
Use a Barbie head. Sawzall with metal cutting blade to cut through pipe without damaging cast iron pipe.
A pipe cutter is the best tool to cut PVC pipe.
Cut it in the middle and replace it with 2 pieces with a union connecting them together.New answerIf the galvanized pipe is used for Vent or waste and your local codes permit YOU can cut the pipe remove it and install a shorter piece connected with a NO HUB Coupling. If the pipe is used for potable water cut out the galvanized pipe use a dielectric nipple then use a female x copper adapter to prevent electrolytic action
While metals can be maliable, it is more often a non-metal. Think dirt vs. a lead pipe.
Cut the pipe and remove it, fix pipe with a coupling.
saw
to cut 42 " pipe place the pipe on a set of bearingspower driven .place a torch on a stand so it is steady .have the pipe roll about 10 inches per minute.thatis what we do.
is it possible to cut your exhaust pipe to make it louder is it possible to cut your exhaust pipe to make it louder