If you access the menu on the DISH Network satellite receiver and access the point DISH screen, it will then allow you to enter your zip code & select the satellite you are currently pointed at. After entering your zip code & selecting the satellite it will calculate the azimuth and elevation angles for you.
You can make your satellite to pick up other signals by aligning the dish properly (elevation and azimuth alignment) taking into consideration the skew angle.
The Dish Network programming you receive will determine what Dish you need.
Using a Dish satellite in zip code 78642: azimuth: 203, elevation:50 and skew: 116
Dish pointing (Azimuth and elevation mount):Set the dish elevation angle first. This is the up/down angle. Use the elevation scale on the back of the dish. Set the polarization or skew angle also. This involves either rotating the LNB or the entire dish assembly. There may be a polarization rotation scale on the feed throat or behind the dish. Face the satellite, clockwise is positive. Polarisation must be set to 1 deg accuracy for transmit dishes and this normally involves talking to the VSAT hub. For the azimuth bearing use a compass or just think where the sun is and the time of day and boldly swing the dish sideways. You should find the satellite on the first swing, then spend half an hour peaking up. Peaking up is really important for long term service quality and minimum outage time during rain fades.
http://www.dbsforums.com/azel.html use this to coordinate azimuth, elevation and angle.
Satellite dish is used to receive the data colleted by the satellite and to give commands to it.
Communication or geostationary satellites orbit the Earth around the equator at a height of approx 23000 miles. To fit a satellite dish to your home you need to know the latitude on the globe of your town. The dish angle approaches the horizontal the further north you live. Note: It's the same for setting the angle of the gnomon on a sundial.
A sky dish is a satellite dish that is used by companies such as Dish Network or DirecTV to receive their satellite signals. They are usually mounted on your home and pointed in the direction of the company's satellite.
If you are referring to the original satellite dish known as the C band satellite, the satellite company that used these was DISH Network.
To find a satellite dish antenna for sale, going to the local television company would be the first stop. Typically they have a wide selection of satellite dish accessories and satellite dishes.
You can usually get an HD satellite dish from your satellite company. Direct TV or Dish Network are two large companies that are available in almost every area. They have HD satellite dishes. www.dishnetwork.com
A Satellite Dish is used to receive and transmit signals which contains different information to or from the satellite.