Under the dash the buzzer is a black square box that can be unplugged.
disconnect the cable from the speaker behind the in the rear piller cover
Pull the key out just a little and the chime will stop. It may be controlledfrom the radio
You can unplug it. Its under the dash board
You can do this by locating the dinger under the dash and unplugging it. Once you have this unplugged, it will not make the sound anymore.
Dont know. Just want to say that. 
Disconnect the battery for 15 mins
disconnect + battery terminal for 60 seconds then re- connect.
To disable the seat belt warning system; you must follow the procedure listed under safety restraints. It is on page 88-91 in my manual and involves a whole list of things you have to do while the ignition system is turned to the on position but without the car running.
I had this problem on my disco 1. Turned out to be the alternator, which was replaced and the problem was fixed.
Sure, disconnect the drive shaft to the wheels that you want to disable. Is it recommended or safe, no, but you could do it. Once you pull the drive shafe, you may get a warning light, could damage systems in the car, could affect the warranty.
1: Disconnect battery for 30 mins, reconnect and if fault is fixed light will go out. 2: Once vehicle is fixed, turn ignition on and off 40 times, if fault hasnt been found in 40 starts the light will reset itself.
how do you disable the service ride control warning indicator light for 2003 escalade