How do you disable a pass time in a Chevy Blazer?

Answer 1

Find the passtime device , it's usually under the dash near the ignition switch. You can trace it by following the wire from the remote eye. There are 5 wires with a plug connector plugged into the device. Leave the red, pink and black wires alone. The blue wire comes from your ignition switch and goes to a relay switch inside the device. The purple wire comes from that switch to your starter.

Leave them cut from the device, but solder, (or connect in some manner) them together so that the passtime device is bypassed. Th enyour starter will get power when you turn the key. That's all there is to it.

the passtime device will still appear to be functioning. It will beep and take codes from the remote, but regardless of whether it is timed out or not your starter will still get power.

** I did not want to cut any wires on my Pass Time Elite so i simply put a jumper between the blue and purple wires coming out of the top of the connector on the pass time unit and achieved the same results **