How do you disconnect a 1996 Ford Escort left front brake caliper?
Re-install 2 lug nuts to hold rotor in place
Disconnect flexible brake line
Remove caliper mounting bolts
Slide caliper off rotor
Jack the front end up and place it on stands. Don't trust a jack. Take the wheel off. Disconnect the hydraulic brake line and plug it. take the 2 caliper bolts off. Spread the caliper by inserting a screwdriver between the rotor and the caliper piston. Slide the caliper off pull out the pads. Put new pads in with the new rotors.
Why do your 2000 deawoo Nubia pull to the right when it change gears also when you slow down it pull to the left?
Remove or disconnect the following: Front wheels Front brake hose bolt and the copper washers and plug the front brake hose 2 front disc brake caliper slide pins, then lift the caliper off of the front caliper anchor plate To install: Install or connect the following: Front disc brake caliper onto the caliper anchor plate. Install the 2 slide pins. Tighten the slider pins/bolts to 21-26 ft. lbs. (28-36 Nm). Front brake hose to the…
Put emergancy brake on, then jack up the front enfd remove tires, use a 3/8 Allen tool to remove the caliper mounting bolts. Then remove the brake caliper, and remove pads from caliper. Next push piston caliper into the caliper, reinstall the caliper. Re install the front wheels, lower the vehicle, pump the brakes until they are hard once again, and your ready to drive again.