Get a rubber hose that is about half inch in diameter and siphon gas out
Where do you add water in the Yamaha grizzly 660?
Well grizzly 660 motor work on a rhino
where is the engine number on a grizzly 660
The VIN is located on the bar in between the front 2 wheels of the Yamaha Grizzly 660. The VIN will be displayed on a green sticker.
Might want to post on http://www.grizzlyforums.com. Its a site dedicated to the Yamaha Grizzly.
its in the vin
Jy4am03y14c048992
10W40
65mph
50 hp
The coolant system capacity of the Yamaha Grizzly 660 motorcycle is 0.32 quarts. This is equivalent to 0.30 Liters.
Carburated
2.6 US QTS
on the motor lol
It says 2.6 QTS
The yamaha Grizzly 660 or 700 is in my opinion the best.
Spark Plug fouling is pretty common.
first u put a jack under the back of your grizzly 660 the oil tank is on the bottom and find the drain plug but before u unscrew the plug put it back down if you do not put it back down you will not get all the oil out and then unscrewand and empty
placard on side of motor states 43 hp
On the Frame, on the left side near the left foot rest. Under it
50/50 reg anti freeze is what i run on all my quads but i don't own a Yamaha
The Yamaha Raptor 660 is a motorcycle that was made by Yamaha between 2001 and 2006. One can purchase a second-hand Yamaha Raptor 660 at a used Yamaha dealer.
the oil that is usually for grizzly is 10w30 but to make sure take your seat off and read the label on your breather it shold be listed under liquids
remove gas tank very easy three bolts for tank and 4 Allen screws for carbs
The oil filter is located at the back of the Yamaha but be careful because you could seriously injur yourself when trying to change the filter of the oil because it's bad.