no problem as long as it is unlead gas,i filled up with my 2002 qx4 and find no big difference as the 91 premium gas.
5 1/4 quarts
Timing chains will normally last the life of the engine. You replace it when the engine is overhauled or if it becomes noisy.
does 2002 inifiniti QX4 have an electrial panel to control each head light (low & high beam)?
Below the engine
Oil filter in an Infinity QX4 1997 is found underneath the engine. The plastic cover that hides the whole engine from below should be removed and there the filter can be seen.
how do you remove the SRS?
A 1999 Infinity Qx4 has an engine oil capacity of 6 quarts. The Infinity uses 10 W 30 engine oil. This oil can be purchased at any auto parts store.
i want to no how i can oprate my nvigation system on my qx4 2001 ples how i can play the navigation system on my qx4 2001 infinti car
There is no inertia fuel pump safety switch in a 1997 Infinity qx4 3.3L 6 cylinder engine.
I am look for a engine for a infinti qx4 i need to see were a knock sensor goes am trying to fix it
on the bottom of the engine next to the drain plug
The Infinity QX4 was introduced in 1996 which was quite a breakthrough for Infinity because of its SUV look and pathfinder body without a pathfinder price. They redesigned the QX4 in 2001. The older models will cost you anywhere from $2,000 to $6,000. As where the newer 2001 and 2002 designs will range anywhere from $7,000 to $11,000. You can find these from independent used car dealerships, independent owners or check online listings or the newspaper for ads advertising a used QX4.
Should be same as QX4 99, 15/city, 19-20 /highway (assuming engine in tip top condition)
The oil filter on a 1998 Infiniti QX4 is located on the bottom, right side of the engine. It is positioned in an downward angle to allow for easier removal.
Anything is possible but the cost of this would be prohibitive.
According to the Gates website ( they make timing belts etcetera ) the 3.3 litre V6 engine in a 1999 Infiniti QX4 has a timing BELT
Roll underneath the vehicle. You will need a 10 mm socket to remove the plastic/cardboardish shield thing that is mounted under the engine to keep grime from splashing up into the engine. Once this is off, you should be able to see the staring straight forward from the bottom front of the engine.
It could be the bearing in your tension pulley.
location fuses in qx4
Mud guard under engine has to be removed before accessing oil filter
I have a 2001 with 194,000 that has never had anything other then preventative maintenance and it is still going strong!
after making repairs, use the consult-II to verify fix and light will go out.
where is the IAT sensor located on 99 qx4 infiniti
Replace the camshaft sensor for whichever bank the code specified. Simple fix