Easy! 1) Buy the Saturn repair book at any an auto store. That will show you the steps to taking the door trim and panelliung off. 2) Look on Ebay for a used Saturn door regulator. This may take a while since there is not always a used regulator being auctioned. orBuy a new replacement regulator on Ebay or online.3) Install it yourself from the instructions in the satrun repair manual. or Get a friend to do it and buy them beer and Pizza.
This should cost no more than $100 (including the booze), and you could get one used for maybe $40 with shipping.
Heck, I'll come fix it for a bottle of Makers Mark.
You can't without removing the power window electric motor to disengage it from the window regulator.
You have to disconnect the glass from the regulator or clip the regulator cables.See this post for instructionshttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
You don't.
You have to disconnect the glass from the regulator or clip the regulator cables.Here's howhttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
usually by replacing window regulator.
window regulator
Remove the window regulator assembly from the door.Remove the motor from the regulator by drilling out the attaching rivets with a 3/16 in. drill bit.Connect the window motor to the regulator with 3/16 in. rivets.Install the window regulator assembly.
If the regulator is broken, you'll have to clip the cables to get to the window glass attaching bolts.Here's how to do ithttp://www.ricksfreeautorepairadvice.com/repair-topics/window-power-repair/replace-a-power-window-regulator
No they are not. They are available separately. The motor is available from most parts houses...the regulator is dealer only!!!
Only if you change out the entire regulator. The power regulator unit is pitched a little different due to the power motor components.
Disconnect the battery.Remove the door panelRemove the power window motorRemove the regulator spring.Move the window down a bit and remove the two 10MM nuts from the window.Twist the window spring stud counter-clockwise.Now you should be able to remove the window regulator.
Remove the door trim panel.Then clip the window regulator cables. Push window up and tape it in place until you can replace the regulator