That depends on what it is doing or not doing.
If you are referring to the little springs inside the clutch assembly itself, you don't fix them, you replace the clutch.See:How_do_you_replace_the_clutch_in_a_96_Geo_MetroIf you mean anything else in there with the clutch, see the above anyway, that'll get you inside.
code 22 needs (engine coolant temperature sensor replaced) don't know about the 25
Get a wiring diagram to find all that is on that fuse then look from there. Get one from MOTORLIT.COM.
i want to look @ a eingine from a geo metro 1995 1.3L l4 so i can fix the part it need.And identify the part its a pullie so for that i can c
the clutch went out on my 97 Chevy cavalier how do i fix it
clutch basket on 89 Harley
You replace it you do not fix it.
Check the bulbs - they are double filamented with the smaller being for the brake lights Check for a blown fuse Check the operation and alignment of the stoplight switch
You don't fix it, you replace it.
I have the clutches in my kx 85 but the clutch rode that goes to the clutch cable keeps Hitting the clutch Case How do I fix it
Buy a new clutch
unbolt tranny from engine clutch is between them
Ford 250 1994
You should not try to repair the fulty joint just replace the entire shaft , it will run you a few hundred dollars. ( 200- 400).
you need to bleed your clutch fluid
kick it. that should help
the most common reason for this would be a worn throwout bearing sizing when hot or worn fingers on clutch plate both require removal of transmission to fix
Locked meaning blown?,no quick fix.
replace the exhaust.gmjim
You have to take it apart to determine what is wrong before you can fix anything.
pump the clutch pedal several times it should fix your problem
Your clutch cable snapped. It should be an easy fix.
if there is a clutch adjustment on car, adjust the clutch if no adjustment, you will shortly need to replace the clutch
You remove it and change the clutch packs.