No , a 1997 Mercury Mountaineer is not designed to have a third row seat ( the 2002 and newer Mercury Mountaineer were designed to have a third row seat )
You can view the 2000 Mercury Mountaineer owners manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides ( page 114 explains how to use the power seat controls on the side of the drivers seat , located between the seat cushion and the door )
On a 1999 Mercury Mountaineer : In the Power Distribution Box ( which is " live " ) located in the engine compartment ( maxi fuse # 4 is a 30 amp fuse for the power seat , power windows and power moon roof ) There are also other fuses listed for the memory seat and heated seats You can view the 1999 Mercury Mountaineer owners manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides ( the fuse section starts on page 170 )
On a 2000 Mercury Mountaineer : ( NO ) it was not designed to have a third row seat ( 2002 model years and newer could have a third row seat )
There are seat belts for ( 5 ) people
According to the 2008 Mercury Mountaineer owners manual : In the Power Distribution Box ( which is " live " ) located in the engine compartment near the brake fluid reservoir : ( mini fuse # 28 is a 20 amp fuse for the heated SEATS )
In a 2000 Mercury Mountaineer : The 6 disc C/D changer should be in the center console ( if not look under the drivers seat )
If your sitting in the driver's seat, open your door and look on the side of your dash panel.
There is a round push button on the side panel of each front seat, located between the seat and the door. Push this button to activate or deactivate the heated seat feature.
The computer module in a 2003 Mercury Mountaineer is located behind the rear right panel in the truck space. The rear right seat belt panel must be removed and then the lower panel. The module is located beneath a green plug.
codes on my 2001 were located behind the passenger side rear seat seat belt panel. I got instructions off EBay for $15. Well worth it.
Power seats are usually on a breaker, not a fuse.
I have an 02 mountaineer, go to page 137 in your owners guide. Its called belt minder. It works, just did it on mine.
because you need hawker system gauges to move it in reverse
how to remove rear seat from 1998 mercury villager
it is located inside the rear driverside panel with the jack its snaped into the panel I have a 1999 Mountaineer, The jack itself is in the compartment inside by Left Rear Taillight. The handle pieces are snapped in place under and behind the passenger side rear seat, under the flap that fills gap between seat back and back cargo area
How do you remove the driver s seat from a1997 mercury villager
According to the owners manual it's number 18. however pulling this did not disable the seat belts for me.
How can remove the rear seat on a 1990 mercury sable
On a 1997 Mercury Mountaineer : The tire jack and lug nut wrench are in the cargo area , on the drivers side , behind a removable plastic panel by the liftgate The ( 2 ) rod sections used for putting the jack in position ( 1 section is used to lower the spare tire ) can be found just behind the rear seat ( go around to the passenger side and tip the seat back forward , lift the carpeted panel and you will see the ( 2 ) rod sections held in place with clips
1993 mercury marquis
63.7lbs Power Seat 47.1lbs Non-power seat
The center seat is removable, after which the rear seat can be slid forward.
Unplug the electrical plugs underneath it, but be aware that this will cause a number of malfunctions.