Make sure water is not coming from a hose or the relief hole in the water pump first. Replace hose or water pump as needed.If it is the gasket, you might want to spend the extra money and replace the water pump as well. All that work and then have your pump go out soon after is a pain($30-40).Be sure to clean all gasket material and grease/dirt from all surfaces before reinstalling a new gasket/pump.If you want a quick fix try a cooling sys stop leak, follow diirctions on bottle.
The first generation Chevrolet Camaro was available with a 6 cylinder engine. A V-8 engine was another option available on the 1966 through 1969 Chevy Camaro.
Coolant sending unit is located at the front of the left cylinder head
THE 1991 Chevy Camaro RS had three engine options: SIX CYLINDER 3.1 V6 140 Horsepower.EIGHT CYLINDER 5.0 V8 170 Horsepower.EIGHT CYLINDER 5.0 TPI V8 215 Horsepower. The 1991 Chevy Camaro Z28/IROC Model came with the 5.7 TPI V8 245 Horsepower.Check out:http://www.musclecarclub.com/musclecars/chevrolet-camaro/chevrolet-camaro-history-3.shtml [URL]http://www.myspace.com/servalspeed[/URL]
The firing order for a 2001 Camaro 3800 is 1-6-5-4-2-3. The number one cylinder is on the left front of the engine.
what type engine oil does a 92' Chevy camaro rs v6 take what type engine oil does a 92' Chevy camaro rs v6 take
Sandwiched between the heads and the engine block.
Depends on the engine... between 190 and 265
Cut the engine capartment out so it fits
on top of engine, to the left side of the throttle body. where the top radiator hose leads to.
Depends on what year/engine in the Camaro...
None, since there is no such thing as a Dodge Camaro
usually engine size. all Z28 are either 5.0 or 5.7 and the RS is either a V6 (3.8 I think) or a 5.0. If the Z and the RS both have 5.0's there will be engine enhancements such as throttle body injection in the RS where as the Z28 had tuned port injection, and other minor mods to the engine and suspension. In other words the Z28 was a little bit better and faster than the 8 cylinder RS.
The chevy 350 engines were produced in production models of Chevy between 1968 until 1998. It was used in several Chevy models such as Chevrolet Camaro and Chevrolet corvettes.
No, because there is not any such thing as A 2006 camaro
The thermostat for a 1999 Chevy Camaro V6 engine can be found under the hood. It is in the right side of the engine, under the throttle sensor.
Chevy didn't offer a 350 in an 86 Camaro, but if they did, it would theoretically work in an 87 Caprice.
Where is the fuse for the computer for 1996 Chevy camaro rsmanual trans 6 cylinder
before this question can be answered we will need to know what type of engine your camaro has.
The 1994 Chevy Camaro horn is located in the front of the engine compartment. The horn will be on the right hand side of the radiator.
Yes it will. GM. put alot of V8 engines in that year camaro.
the 82 is a 4 cylinder. also the 77 convert. is 4 cylinder. hope you find what you looking for
1994 Chevy Camaro cars came in either V6 or V8 versions, meaning the engine had 6 or 8 cylinders. Additionally, some models during this time period came with an all-aluminum engine.
There was no 1962 Camaro (and no 2009 Camaro for that matter either, the current one is a 2010)